Lincoln Electric CAN-M393 User Manual

Can-m393, Softweld 99ni, For welding consumables and related products

Advertising
background image

Date:

2/8/05

MSDS No.:

CAN-M393

Trade Name:

Softweld 99Ni

Sizes:

All

Supersedes:

2/25/02

M A T E R I A L S A F E T Y D A T A S H E E T

For Welding Consumables and Related Products

Conforms to Workplace Hazardous Materials Information System (WHMIS) Rev. November, 1988

Section I & II - Preparation and Product Information

Product Type:

Covered Electrode

Representative Classifications:

AWS ENi-CI

The Lincoln Electric Company of Canada LP

179 Wicksteed Avenue

Toronto, Ontario M4G 2B9 CANADA

Phone: (416) 421-2600

Prepared by The Lincoln Electric Company, Cleveland, Ohio, USA

(216) 481-8100, on the date shown above.

Section III - Hazardous Ingredients (1)

I M P O R T A N T !

This section covers the materials from which this product is manufactured. The fumes and gases produced during welding with the normal use of this

product are covered by Section VII; see it for industrial hygiene information.

CAS Number shown is representative for the ingredients listed. All ingredients listed may not be present in all sizes.

(1)

The term “hazardous” in “Hazardous Ingredients” should be interpreted as a term required and defined in the Hazardous Products Act and does

not necessarily imply the existence of any hazard.

Ingredients:

CAS No. Wt. %

TLV
mg/m

3

LD

50

(Route/Species)

LC

50

mg/m

3

(Route/Species)

Limestone and/or calcium carbonate

1317-65-3

1-5

10

Not Available

Not Available

Iron

7439-89-6

1-5

10*

Not Available

Not Available

Graphite

7782-42-5

1-5

2.0

Not Available

Not Available

Fluorides (as F)

7789-75-5

1-5

2.5

4250 mg/kg

(oral/rat)

Not Available

Strontium compounds (as Sr)

1633-05-2

1-5

10*

Not Available

Not Available

Silicates and other binders

1344-09-8

1-5

10*

1153 mg/kg

(oral/rat)

Not Available

Manganese and/or manganese alloys and compounds (as Mn)

7439-96-5

0.1-1

0.2

9 g/kg

(oral/rat)

2.3 LCLo

(inhalation/human)

Mineral silicates

1332-58-7

0.1-1

5**

590 g/kg LDLo

(oral/rat) reproductive

Not Available

Cellulose and other carbohydrates

65996-61-4

0.1-1

10*

Not Available

Not Available

Titanium dioxides (as Ti)

13463-67-7

0.1-1

10

Not Available

Not Available

Nickel core wire

7440-02-0

60-100

1.5

50 mg/kg LDLo

(intravenous/mouse)

Not Available

Notes:

(*) Not listed. Nuisance value maximum is 10 milligrams per cubic

meter. TLV value for iron oxide is 5 milligrams per cubic meter.

(**)

As respirable dust.

(LDLo, LCLo) Lowest published toxic concentration.

Section IV - Physical Data

Physical data such as odor, vapor pressure, density, evaporation rate and freezing or boiling points are not listed as they are not applicable to
this product and its use.

Section V - Hazard Data

Non Flammable; Welding arc and sparks can ignite combustibles and flammable products. See CSA W117.2 Section 9.7 as referenced in
Section VIII. Product is inert, no special handling or spill procedures required.
Rev 7/04

(CONTINUED ON SIDE TWO)

Advertising