LG 26-3DCH-UA - Manual (Page 29)

P A G E 2 9
206-4071
On Target TV, Teach Master TV Profile
1. Plug USB memory card with Master TV Profile
setup into Target TV USB In port.
2. Press Menu key to open Main menu and then
highlight the Option Menu icon.
3. Press the Left arrow key once, this will highlight
the Option icon on left side of menu.
4. Press number key ‘7’, a total of 7 times.
5. Using the Up/Down arrow key, select ‘Teach New
Profile’, then press Enter key.
6. Use Up/Down arrow keys to navigate through
profiles. Select the profile that you want to
install by highlighting it and pressing the Enter
key.
7. Teaching progress will be shown on the progress
bar. As soon as teaching is done, a message will
appear indicating that the teaching process has
been completed.
Master TV Profile Setup Learning/Teaching with USB Memory Card
Teach Current Profile
Teaching the selected profile to the TV:
20%
Do not unplug until restart automatically!
On Master TV, Create Profile and Learn
1. Set up all Master TV features on the menus and
do a Channel Search. Add Channel and Aux
Labels etc. Tune in an analog channel.
2. Plug USB memory card into the USB In port on
Master TV.
3. Press Menu key to open Main menu. Highlight
the Option icon.
4. Press the Left arrow key once, the Option icon
on left side of menu will be highlighted.
5. Press number key ‘7’ a total of 7 times.
6. Key in password* used to enter Installer Menu.
7. Using Up/Down arrow key, highlight “Learn
Current Profile’, then press Enter.
8. To identify the profile from others, you can
change the last 5 digits. Key in a custom file
name, then press the Enter key.
9. The Learning status will be shown on progress
bar. As soon as learning the current profile is
complete, a message will appear on screen indi-
cating the learning process is done.
10. Remove the USB memory card.
Upgrade TV Software
Select a type of sofware to be downloaded:
Upgrade TV Software
Upgrade PTC Software
Teach To TV
Learn From TV
Learn From TV
Learning current profile from master TV:
20%
Do not unplug until restart automatically
* See Installer Menu pages.