Lucent Technologies Basic Telephone Module CIB 3020 - Manual (Page 3)

CIB 3020
10-Basic Telephone Module
The 10-Basic Telephone Module (Figure 1) allows you to connect up to ten
basic touch-tone or rotary telephones to your Model 1030 or 3070 communica-
tions system. Up to six 10-Basic Telephone Modules can be installed in both
your control unit and expansion unit, allowing a total of 60 basic telephones
to be connected to your communications system. To use this module, one
Ring Generator Unit must be connected to your communications system to
provide current to the telephone ringers. If you have the maximum number
(60) of basic telephones connected, you will also need a Power Module for
Model 3070 which supplies power for the last 10 telephones connected to
the system.
By using dial codes with your basic touch-tone or rotary telephones, you have
access to the advanced features of your communications system. (See the
User’s Guide for Basic Touch-Tone or Rotary Telephones for further informa-
tion.) To assign lines to your basic telephones, refer to the section titled “Ad-
ministering the Basic Telephones Connected to Your 10-Basic Telephone
Module” at the end of this document.
Figure 1
10-Basic Telephone Module
1