Lenoxx Electronics CD-2087 - Manual (Page 8)

IB-CD2087(AD)-WC-E-062906
CD PROGRAMMED PLAY
To change the current program
Just create a new program following the above programming procedure.
To cancel Programmed Play
Press the STOP button twice, the symbol PROG will disappear from the display.
7
You can make a program up to 20 tracks in the specified order you want them to be
played.
NOTE:
1. Programming can only be done in STOP mode.
2. The programmed memory will be lost if the STOP button is pressed twice, or the
alkaline batteries are exhausted or removed, or AC power is shut off, or the CD
DOOR is opened.
3. The player will stop automatically after all the programmed tracks have been
played.
1. Slide the FUNCTION switch to the CD/MP3/AUDIO IN
position. Make sure the set is in the STOP mode.
2. Press the PROGRAM/EQ button once. The symbol
“PROG” will show in the display, and the symbol
“
” will flash in the display..
3. Press the SKIP/SEARCH buttons ( or ) or 10+/
ALBUM button to select the tracks to be programmed
in the order that you want.
4. Press the PROGRAM/EQ button to confirm. The
program number 2 will now show in the display,
ready for your next selection of track.
5. Repeat above steps 3 and 4. You can program up to
20 tracks.
6. After programming is finished, press the PLAY/PAUSE
button to start programmed play.
Programming Example
Program Number
Track Number (song number) 2
1 2
5
3
8 4
1
5
2 6
4
7
1
8
1 etc.
etc.
Program number
PROG
CD
PROG
CD
Track number
PROG
CD
PROG
CD
EQUALIZER FUNCTION
During play, you may select the tone type by pressing the PROGRAM/EQ button to
choose the tone type. The display will show what you selected: DBB, POP, CLASSIC,
JAZZ, ROCK or NORMAL.
IB-CD2087-WC-E-062906(WMA).pmd 7/13/2006, 4:44 PM 8