Lennox Hearth BT4010 - Manual (Page 6)

5
english
Jabra bt4010
1. Charge your headset
make sure that your Jabra bt4010 headset is fully charged before
you start using it . use the ac adaptor to charge from a power
socket . your headset indicates the charging level while charging:
What you see What you see
1st battery level flashing less than 30%
2nd battery level flashing between 30 - 70%
3rd battery level flashing more than 70%
all battery levels on, no
flashing
Fully charged
please note: the lifetime of the battery will be significantly
reduced if your device is left uncharged for a long period . We
therefore recommend that you recharge your device at least once
a month .
Turning your headset on and off
- press and hold the answer / end button to turn on your
headset . the lcd display will show the battery status to
indicate the headset is on .
- press and hold the answer / end button to turn off your
headset until you see the indicator turn off in the lcd display .
Pairing the headset with your phone
before you use your Jabra bt4010, you need to pair it with your
mobile phone .
1 . your headset will automatically go into pairing mode when you
turn it on the first time, and you will see the bluetooth indicator
flashing in the lcd display .
2 . set your bluetooth phone to ‘discover’ the Jabra bt4010 .
Follow your phone’s instruction guide . this usually involves
going to a ‘setup,’ ‘ connect’ or ‘bluetooth’ menu on your phone
and selecting the option to ‘discover’ or ‘add’ a bluetooth
device .*