Lg nas connection, Otherwise go to – LG Network Attached Storage with built-in Blu-ray Rewriter N4B1 User Manual
Page 24
. LG NAS Installation
LG NAS connection
For a particular IP address allocated from the Network IP administrator, installation
using an IP address, subnet mask, default gateway and allocated DNS information is
simple. Otherwise the LG NAS will automatically set up the network environment.
Connect devices as follows, referring to the user’s own network environment.
① Using the included LAN cables, connect LAN ports on LG NAS and network devices
(home router/router/switch/hub) to each other or directly plug them into the LAN
port on the PC.
A.
If the network component (home router/router/switch/hub) is used to connect
the LG NAS (home router/router/switch/hub) to the PC, use the following
procedure.
Internet
Desktop PC
Notebook
LG NAS
home router/
router/switch/hub
B.
If the LG NAS is connected directly to the PC without another network device,
it must be connected directly to the PC using a LAN cable,
and then the IP address must be set to 1.1.1.01 and the subnet mask to
...0.
LAN Cable
Desktop PC
LG NAS
* In this case, PC Internet may be disconnected