Land Pride SF25 Series - Manual

20
www.landpride.com
• Cat. 1 hitch
• Four ripping depths
• Heat treated steel shanks
• Replaceable shank tips
• Rear hitch with floating top link
for second implement
SF25
SERIES
25 - 50 HP — 66” 77”
The Land Pride Scarifier
can work in unison with our 3-point 15 and
25 Series Landscape Rakes and Rear Blades.
All Land Pride Scarifiers
feature a 5/16” wall
thickness on the
shank tube for high
tensile strength, and a
5/16” x 1” full length
reinforcement bar.
Scarifier Specifications
Model/Number
Width (cm)
Working Width (cm)
Approximate Weight - lbs. (kg)
Horsepower Rating - engine
Hitch Type
No. of Shanks
Shank Type (mm) SF2566
66" (168)
60" (152)
208 lbs.(94)
6
SF2577
77" (196)
72" (183)
235 lbs.(107)
7
Up to 50 (37)
Cat. I
3/4" x 2 1/2" (19 x 63.5) Heat Treated, Spring Steel Dimpled-On Tips
Maximum HP Rating based on 2WD specifications.
Landscape Rake Specifications
*Flip-down grader blade must be used in conjunction with dual gauge wheels. Maximum HP Rating based on 2WD specifications.
Model/Series
Rake Width (cm)
Maximum HP Rating
Hitch Type
Angle/Position
Offset (cm)
No. of Teeth
Teeth Spacing (mm)
Teeth Material
Tooth Size (cm)
Rake Height (cm)
Appx. Wt.-3 Pt. lb (kg)
Options
LR0548 LR0560 LR0572
48" (122) 60" ( 152) 72" (183)
25 HP
Cat. 0 w/Cat. I Pins or Pull Type
5 Forward Up to 30°
N/A
26 34 40
1 3/4" (44.45) Centers
High Carbon
Spring Steel
1/4" x 3/4" (0.64 x 1.91)
12" (30.48)
98 (44) 113 (51) 123 (56)
98 (44) 115 (52) 123 (56)
8" x 1.75"
LR1560 LR1572 LR1584 LR1596
60" (152) 72" (183) 84" (213) 96" (244)
35 HP
Cat. I
5 Forward Up to 30°,
7 Rev. up to 45°
N/A
30 36 42 48
2" (50.8) Centers
High Carbon
Spring Steel
5/16" x 1" (0.79 x 2.54)
16 1/2" (41.91)
241 (109) 270 (122) 291 (132) 316 (143)
Dual Gauge Wheels 13" x 4" x 6" and
13" x 6.5" x 6"
*Flip-Down Grader Blade
LR2572 LR2584 LR2596
72" (183) 84" (213) 96" (244)
50 HP
Cat. I
7 Forward Up to 45°,
5 Rev. up to 45°
N/A
36 42 48
2" (50.8) Centers
High Carbon
Spring Steel
5/16" x 1" (0.79 x 2.54)
16 1/2" (41.91)
328 (149) 352 (160) 377 (171)
Single Gauge Wheel 8" x 4" x 4.8"
Dual Gauge Wheels 13" x 4" x 6" and
13" x 6.5" x 6", *Flip-Down Grader Blade
Hydraulic Angle Cylinder
LR3584 LR3596
84" (213) 96" (244)
65 HP
Cat. I, II
9 Forward Up to 60°,
5 Rev. up to 60°
45° Swing 24" (61) Offset
Manual or Hydraulic
42 48
2" (50.8) Centers
High Carbon
Spring Steel
5/16" x 1" (0.79 x 2.54)
16 1/2" (41.91)
460 (209) 483 (219)
Single Gauge Wheel 8" x 4" x 4.8"
Dual Gauge Wheels 13" x 4" x 6"
and 13" x 6.5" x 6"
*Flip-Down Grader Blade
SCARIFIeRS