Land Pride RC5020 - Manual (Page 12)

10
Introduction
RC5020 (540 RPM) and RCM5020 (1000 RPM) Rotary Cutters 318-474M 5/29/13
Table of Contents
Introduction
Owner Assistance
The Online Warranty Registration should be completed
by the dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Rotary Cutter have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
Model No. _____________Serial No. _______________
For quick reference and prompt service, record model
number and serial number in the spaces provided above
and again on warranty page 51. Always provide model
number and serial number when ordering parts and in all
correspondences with your Land Pride dealer. Refer to
Figure 1 for location of your serial number plate.
Serial Number Plate Location
Figure 1
Free Informational Video
Be sure to request your free copy of the 15' Rotary
Cutter Informational Video (also applicable to
10', 14' & 20' cutters) from your local Land Pride dealer.
Further Assistance
Your dealer wants you to be satisfied with your new
machine. If for any reason you do not understand any
part of this manual or are not satisfied with the service
received, the following actions are suggested:
1. Discuss the matter with your dealership service
manager making sure that person is aware of any
problems you may have and has had the opportunity
to assist you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
[email protected]
27524
Land Pride welcomes you to the growing family of new
product owners.
This implement has been designed with care and built by
skilled workers using quality materials. Proper assembly,
maintenance, and safe operating practices will help you
get years of satisfactory use from this machine.
Application
The heavy duty RC5020 and RCM5020 Series Rotary
Cutters are designed and built by Land Pride to provide
excellent cutting performance on gently sloping or
slightly contoured right-of-ways, roadsides, pastures,
set-aside-acres, or for residue in row crop fields.
The 20' cutting width, 2" to 14" cutting height and ability
to cut weeds and brush up to 3" in diameter make them
well suited for these applications.
Both models offer pull-type self-leveling clevis hitches for
attachment to 70-250 hp tractors. The RC5020 has a
Cat. 5 and 540 rpm driveline, while the RCM5020 has a
Cat. 5 and 1000 rpm driveline. They also offer various
safety guard selections making them an excellent choice
for state and municipal mowing applications.
See “Specifications & Capacities” on page 46 and
“Features & Benefits” on page 48 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com.
Terminology
“Right” or “Left” as used in this manual is determined by
facing forward in the direction the machine will operate
while in use unless otherwise stated.
Definitions
IMPORTANT: A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE: A special point of information that the
operator should be aware of before continuing.