Lightolier Calculite HID Lensed Wall Wash C7P38MHL - Manual

3 2 4 5 7 8 9 10 1 6
1 1/8" (29 mm) max.
Ceiling Thickness 7" (178 mm) Dia.
8-3/8" (213 mm) Dia.
11 7/8"
(302 mm)
Vertical Adjustment:
3/4" (25 mm) to
2 7/8" (73 mm)
5/8" (16 mm)
Calculite ® HID Lensed Wall Wash
C7P38MHL
Page 1 of 2 7" Aperture, PAR38 Ceramic Metal Halide, Lensed
Features
1. Reflector Trim: Low brightness, anodized aluminum integral flange in
painted white or polished to match inside of cone.
2. Directional Spread Lens: High temperature, tempered glass.
Precisely fits onto cone; replaceable.
3. Kick Reflector: 0.040” (16 ga.) aluminum. Clear anodized “Kick” reflector
with directional spread lens distributes light smooth for vertical surface
wall washing.
6. Socket: Medium base porcelain socket with nickel plated screwshell,
pulse rated.
7. Frame Housing: Steel, 0.029" (22-Ga.), matte black finish.
8. Frame Vertical Adjustment Mechanism: Accommodates mounting to
virtually any ceiling system using pre-installed mounting bars, or 1/2" EMT
tubing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside fixture.
7. Mounting Bars: Galvanized steel, 0.048" (18-ga.), pre-installed telescoping
bars extend to 30" long and lock securely into position. Built-in locking tabs
provide positive attachment to common T-bar systems. Self-centering feature
simplifies installation in 24" O.C. grid systems. Attaches to steel or wood
joists without accessories.
8. Retention Springs: Rust resistant springs secure trim for quick, tool-less
installation.
9. Ballast / Cover Assembly: Accessible from below and removable
without tools for inspection and ballast replacement .
10. Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90°C through branch circuit conductors. Allows inspection from below.
11. Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not
install insulation above nor within 3" (76mm) of any part of the luminaire.
Electrical
Electronic Ballast: 120V or 277V, 50/60 Hz., encased, high power factor, T.H.D.
<15%, thermally and transient protected, RMI/RFI complies with FCC part 18
non-consumer limits, shut-down circuit at end of lamp life, sound rating "A",
-5° F minimum starting temperature, Type 1 Outdoor rating.
Electrical (cont.)
Ballast ANSI Code Voltage Max. Amps Input Watts
70W MH M98/M143 120/277 0.67/0.28 78
100W MH M90/M140 120/277 0.90/0.43 110
Magnetic Ballast: 120V/277V Dual Voltage, 60HZ Encased and potted, H8-HPF
Circuit type, high power factor, sound rating “B”, -20° F minimum starting tem-
perature, type 1 outdoor rating.
Ballast ANSI Code Voltage Max Amps Input Watts
70W MH M98/M143 120/277 1.90/0.80 94
100W MH M90/M140 120/277 2.40/1.10 125
Options and Accessories
Fuse (magnetic ballast): Add suffix F1 or F2 to FIK (F1=120V F2=277V)
Chicago Plenum: Consult Factory.
Labels
UL (Suitable for Damp Locations), CSA (magnetic ballast only), I.B.E.W.
Top View
(Electronic Ballast)
P
20" (508 mm) to
30" (762 mm)
10-5/8"
(270 mm)
15
"
(3
81
m
m
)
19
-1
/8
"
(4
86
m
m
)
20-1/4" (514 mm)
S
15
"
(3
81
m
m
)
10-5/8"
(270 mm)
20" (508 mm) to
30" (762 mm)
T
Top View
(Magnetic Ballast)
22-1/8" (562 mm)
19
-5
/8
"
(4
98
m
m
)
Reflector Trim Frame-In Kit Lamp (Ceramic MH)
C7P38MHL CLW Specular Clear, White Painted Flange. C7A70P38E1 Electronic 120V 70W PAR38 Wide Flood
CLP Specular Clear, Matching Flange. C7A70P38E2 Electronic 277V 70W PAR38 Wide Flood
CCDW Comfort Clear Diffuse, White Painted Flange. C7A10P38E1 Electronic 120V 100W PAR38 Wide Flood
CCDP Comfort Clear Diffuse, Matching Flange. C7A10P38E2 Electronic 277V 100W PAR38 Wide Flood
CCZW Champagne Bronze, White Painted Flange. Magnetic 120V/277V 70W PAR38 Wide Flood
CCZP Champagne Bronze, Matching Flange. Magnetic 120V/277V 100W PAR38 Wide Flood
Ceiling Cutout: 8" (203mm) Dia.
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • B0406