Dms01, Decorative, square marker led – Lightolier Architectural Decorative DMS01 User Manual

Page 2

Advertising
background image

DMS01

Decorative, Square Marker LED

Page 2 of 2

Philips Lightolier

e: [email protected]

t: (508) 679-8131

w: www.lightolier.com
DMS01 February 23, 2012
Specifications are subject to change without notice.

© Koninklijke Philips Electronics N.V., 2012. All rights reserved.

Job Information

Type:

Features

1. Heat Sink/Driver Housing: Die cast aluminum.
2. Lens: Injection molded acrylic sandblasted with clear
polished edges, developed for optimum optical output.
3. Acrylic Mounting Plate: Die cast aluminum.
4. Re-modeler Junction Box: Die cut and formed 16ga.
Galvanized steel. Can be used in new or existing construction.

Electrical

LED: (1) 1W 3000K white LED. Average expected life, under
normal operating conditions is 50,000 hours with lumen
maintenance of 70% of original light output.
Driver: Integral Class 2 power supply.
Voltage:

120V

Electrical (continued)

Output Wattage:

1 W

Input Current (max.): 65 mA
Frequency:

50/60 Hz

Output Voltage (VDC): 4 V
Constant Current:

350 mA

Finish

Lens – Sandblasted acrylic with clear polished edges.

Labels

cULus Listed. Suitable for Wet Locations. Type IC.
Wall mount only.

3"

(77 mm)

4 ⅛"

(104 mm)

¾"

(18 mm)

3"

(77 mm)

1 ¾"

(45 mm)

3"

(77 mm)

¾" (18 mm)

1 ¾"

(945 mm)

4 ⅛"

(104 mm)

1

11 16

"

(43 mm)

4 ⅞"

(123 mm)

2

4

Advertising