La Crosse Technology WS-7038U User Manual
Page 12
12
TROUBLESHOOTING
Problem:
The LCD is faint.
Solution:
1) Replace batteries.
Problem:
“OFL” appears in LCD.
Solution:
1) Follow Reset directions. (Total rainfall accumulation has
exceeded 999.99in.)
Problem:
“---” Appears in LCD (rain monitor has lost signal from gauge)
Solution:
1) Follow reset directions.
2) Distance the Rain Monitor or Rainfall Sensor at least 6 feet (2m)
away from interfering sources on a 433 MHz signal (computers, TV
sets, headphones, speakers, etc.).
3) Move receiver away from metal window frames.
4) Neighbors using 433 MHz devices can interfere also.
Problem:
Need to reset the bar graph (EEPROM Rain Monitor memory)
Solution:
1) Remove batteries, and follow instructions in section III, under
Features & Operations.
Problem:
Rainfall amount is not correct.
Solution:
1) Manually change the rain multiplicator number to 105, following
instructions in section II, under Features & Operations.
Note:
For any questions not answered, contact La Crosse Technology with the contact
information found at the end of this instructional manual.