Lumiscope 1145 - Manual (Page 8)

14
Problem Symptom Check This Remedy
Error
message Err shows
on the
display. A measure-
ment error
occurred Relax for a
moment and then
measure again
Err 1, 2, or
3 shows
on the
display The wrist cuff
is not secure Refasten the cuff
and then measure
again
Err 4
shows on
the display The monitor
detected
motion while
measuring Movement
can affect the
measurement.
Relax for a
moment and then
measure again
Err 5
shows on
the display Pressure is
over 37.3 kPa
(280 mmHg) Relax for a
moment and then
measure again
Err 6
shows on
the display Deflation
period was too
long Movement
can affect the
measurement.
Relax for a
moment and then
measure again
Problem Symptom Check This Remedy
Error
message Err 7 or 8
shows on
the display A calibration
error occurred Retake the
measurement. If the
problem persists,
contact the retailer
or our customer
service department
for further
assistance. Refer
to the warranty for
contact information
and return
instructions
Settings
are wrong Date and
time are
incorrect The clock was
not set or reset
after installing
new batteries Reset the clock
Measure-
ment unit
(kPa or
mmHg) are
incorrect The
measurement
unit was not set
or reset after
installing new
batteries Reset the
measurement unit
13
4. If you decide to abort the delete action instead, press
to go back to the main screen.
Deleting All Records
1. Press or to recall the latest measurement
record for User 1 or User 2.
2. Press and hold SET until the LCD shows “dEL ONE”.
3. Press
to show the option of deleting your entire
measurement history; the LCD displays “DEL ALL”.
4. Press SET to delete all measurement records. After
you have confirmed deleting all records, the screen
shows dEL dONe.
5. If you decide to abort the delete action instead, press
once OR press twice to go back to the
main screen.
Troubleshooting
This section includes a list of error messages and
frequently asked questions for problems you may
encounter with your blood pressure monitor. If the
product is not operating as you think it should, check
here before arranging for servicing.
Problem Symptom Check This Remedy
No
power Display is
dim or will
not light up Batteries are
exhausted Replace with new
batteries
Batteries
are inserted
incorrectly Insert the
batteries correctly
Low
batteries shows
on the
display
Batteries
are low Replace
with new
batteries