Lightning Audio S1.600D - Manual (Page 2)

- 1 -
Introduction
InnoVAte or DisintegrAte!
Thank you for purchasing the Lighting Audio Storm Amplifier.
Our customers have come to expect that Lightning Audio pushes the edge in audio. Now we will push the edge in the ampli-
fier and woofer business with high value and high performance models.
For the first time, amplifiers can be personalized by the customer with accessories like the POWERCell and FANModule.
These accessory components are designed with performance and customization in mind.
If, after reading your manual, you still have questions regarding this product, we recommend that you see your Lightning
Audio dealer. If you need further assistance, you can call us direct at 1-800-669-9899. Be sure to have your serial num-
ber, model number and date of purchase available when you call.
The serial number can be found on the outside of the box. Please record it in the space provided below as your perma-
nent record. This will serve as verification of your factory warranty and may become useful in recovering your amplifier if
it is ever stolen.
Serial Number: ______________________________________
Model Number: ______________________________________
SpecificAtions
Number of Channels:
4 Ohm Power @ 1% THD+N:
2 Ohm Power @ 1% THD+N:
Input Sensitivity:
Power Connector:
Frequency Response:
Subsonic Filter:
Signal to Noise Ratio:
Crossover LP:
Crossover Slope:
Pass Through Output:
LA Power Cell Connector:
LA Fan Connector:
LA Lighted Logo Connector:
Juice Boost EQ @ 45Hz:
Specifications subject to change without notice
Storm S1.600D
Mono AmplifierS
Storm S1.1000D
1
300
600
130mV–3.5V
LA Power Connector
10–250Hz
Switched
90dB
Variable 50–250Hz
24dB/Octave
Yes
Yes
1 on PC Board
1 on PC Board
0 – +18dB 1
600
1000
130mV–3.5V
LA Power Connector
10–250Hz
Switched
90dB
Variable 50–250Hz
24dB/Octave
Yes
Yes
1 on PC Board
1 on PC Board
0 – +18dB