Link electronic GT701AP - Manual (Page 39)

38
9. The “Internet Protocol (TCP/IP) Properties” window appears.
10. In the General tab, activate “Use the following IP address” by clicking on the
circle. When active, a black dot will appear in the circle. If the circle already
contains a black dot, leave it alone.
11. Enter the following numbers in the “IP Address” text box:
192.168.0.2
You don't have to include the periods; they are automatically entered.
12. Enter the following numbers in the “Subnet mask” text box:
255.255.255.0
13. Click OK. The “Internet Protocol (TCP/IP) Properties” window disappears.
14. In the “Local Area Connection Properties” window, click OK. The Local Area
Connection Properties window disappears.
15. Click Close in the Local Area Connection Status window. The window disappears.
16. Close the Network and Dial-up Connections window by clicking on the “x”
button at the upper right corner of the window. The IP address on the com-
puter is changed.