Linksys WRE54G - Manual (Page 11)

7 Chapter 3: Getting to Know the Wireless-G Range Expander
The Power Plate
Wireless-G Range Expander
Reset Button There are two ways to reset the Range Expander's factory defaults. Either press the Reset
Button, for approximately ten seconds, or restore the defaults from the Password tab in
the Range Expander's Web-Based Utility.
The Power Plate
The back of the Range Expander has a two-pronged recess where its power plates can be connected. Two power
plates come with the Range Expander, one with two prongs for connecting directly to a power outlet, and another
with a cord to reach a power outlet.
These power plates are slid into the recess and are fully connected when the orange tab snaps into place. To
remove the power plate, slide the tab to the right and slide out the power plate. Always unplug the Range
Expander before removing the power plate.
Figure 3-2: The Power Plate