Lincoln Electric Prince XL - Manual (Page 2)

A CLOSER LOOK
Prince XL Push-Pull Torch, Air-Cooled, 25 ft. (7.6m) K2296-2
Recommended Expendable Parts
Drive Roll Kits See chart above
Knurled Drive Roll KP2219-1
Idler Roll Assembly KP2220-1
Contact Tips See chart above
Copper Gas Cups See chart above
Torch Liners KP2226-1
Conduits KP2072-28
Barrel Assemblies
See chart above
Recommended Wire Feeder
Cobramatic Wire Feeder See Publication E8.300
Recommended Power Sources
CV-250 See Publication E4.10
CV-300 See Publication E4.20
CV-400 See Publication E4.30
CV-655 See Publication E4.40
Power MIG 300 (Requires K2154-1, Push-Pull Torch Connection Kit) See Publication E7.56
V350-PRO See Publication E5.91
DC-400 See Publication E5.20
DC-600 See Publication E5.40
DC-655 See Publication E5.46
Ranger 250 See Publication E6.103
Ranger 305G See Publication E6.117
Ranger 305D See Publication E6.118
Commander 300 See Publication E6.205
Vantage 500 See Publication E6.216
TOTAL:
PRINCE ® XL PUSH-PULL TORCH ORDER FORM
PRODUCT DESCRIPTION ORDER NUMBER QUANTITY PRICE
T H E L I N C O L N E L E C T R I C C O M PA N Y
22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com
CUSTOMER ASSISTANCE POLICY
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln
Electric for advice or information about their use of our products. We respond to our customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such
information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to such information or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating
or correcting any such information or advice once it has been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained
in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
EXPENDABLE PARTS
Copper Gas Cups
#6, 3/8" (9.5mm) ID
KP2213-1
#8, 1/2" (12.7mm) ID Finned KP2214-1
#10, 5/8" (15.8mm) ID Finned (1) KP2215-1
#10, 5/8" (15.8mm) Heavy
Duty Finned KP2216-1
Torch Liners
All Wire Types,
.030-1/16" (0.8-1.6mm) – 5 pk. KP2226-1
Conduits
25 ft. (7.6m)
KP2072-28
Barrel Assemblies
Air-Cooled, 3/8" (9.5mm)
straight barrel (1) KP2298-1
Air-Cooled, 3/8" (9.5mm)
curved barrel KP2298-2
Drive Roll Kits
.030" (0.8mm) Insulated Grooved
KP1594-030
.035" (0.9mm) Insulated Grooved KP1594-035
3/64" (1.2mm) Insulated Grooved KP1594-3/64
1/16" (1.6mm) Insulated Grooved KP1594-1/16
Drive and Idler Rolls
Knurled Drive Roll
(1) KP2219-1
Idler Roll Assembly (1) KP2220-1
Contact Tips
3/8" (9.5mm) Diameter:
.030" (0.8mm) KP2217-1B1
.035" (0.9mm) KP2217-2B1
3/64" (1.2mm) (1) KP2217-4B1
1/16" (1.6mm) KP2217-5B1
Tip Extender KP2244-1
Tip Removal Tool for
3/8" (9.5mm) Diameter Tips
KP2072-6
Description Order Number Description Order Number
(1) Standard,
included with torch.