Lincoln Electric 900 - Manual (Page 4)

Nozzle Assembly S22693-118
Retainer (Standard spacing for .045 and .052 dia electrodes) S22693-152
Retainer (Wide spacing for special applications) S22693-135
Retainer “0” ring S22693-136
Nozzle Retainer Insulator (Standard spacing) S22693-117
Nozzle Retainer Insulator (Wide spacing) S22693-146
Wire liners:
.035-.045 6 ft. S22693-9
.035-.045 15 ft. S22693-158
.052-.062 6 ft. S22693-10
.052-.062 15 ft. S22693-159
Diffuser (non-taper lock) S22693-120
Short diffuser (non-taper lock) S22693-206
Contact Tips:
.030” dia. Heavy Duty S22693-1
.035” dia. Heavy Duty S22693-2
.045” dia. Heavy Duty S22693-3
.052” dia. Heavy Duty S22693-4
.062” dia. Heavy Duty S22693-5
Taper Lock Diffuser S22693-207
Taper Lock Contact Tips:
.030” dia. Taper Lock S22693-191
.035” dia. Taper Lock S22693-129
.045” dia. Taper Lock S22693-181
.052” dia. Taper Lock S22693-194
.062” dia. Taper Lock S22693-195
TOTAL:
EXPENDABLE REPLACEMENT PARTS FOR TANDEM MIG 800 AMP WELDING TORCH
Parts Description Part Number Quantity Price
T H E L I N C O L N E L E C T R I C C O M PA N Y
22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com
C U S T O M E R A S S I S T A N C E P O L I C Y
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our
customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers based
on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such information or
advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to such information or advice. As a matter of
practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has been given, nor does the provision of information or
advice create, expand or alter any warranty with respect to the sale of our products.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the
customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change — This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
EXPENDABLE REPLACEMENT PARTS
Diffuser and contact tips:
High current capacity taper lock contact tips and diffuser
As standard, the Tandem MIG 800 Amp Welding Torch is supplied with Taper Lock
Diffusers (S22693-207) and Taper Lock Contact Tips. Diffusers are designed to provide a
larger seating surface for the contact tips. The enlarged seating surface provides better
current carrying capacity over conventional diffuser designs. Better current carrying
capacity means less heating of the contact tips, longer tip wear and fewer tip changes.
The diffuser design is complimented with a taper lock contact tip design providing a
generous contact mating surface, fewer screw threads and dual thread starting points to
speed tip replacement time.
Conventional heavy duty contact tips and diffuser
Industry standard contact tips and diffuser design are available for end users that have
established a plant standard. The diffuser design is unique to the Tandem MIG torch,
however the contact tip can be used on compatible semiautomatic welding torches.
Taper Lock Diffuser and Contact Tip
Conventional Diffuser
and Contact Tip