Liebert Y - Manual

Liebert Corporation • 1050 Dearborn Drive • PO Box 29186 • Columbus, OH 43229
Phone 607-724-2484 • Fax 607-722-8713 • US & Canada 800-288-6169
EMAIL: [email protected] • Web Site: www.Liebert.com
82247 Rev 0
Liebert AC Power Low Exposure Transient Voltage Surge Suppressor, electronic grade surge
protective device designed with sine wave tracking to protect electronic equipment and
microprocessor-based systems from transients on distribution panels, branch panels, or equipment in
low exposure locations. Dry contacts for remote indication standard.
AC Power Low Exposure TVSS Technical Specification
Connection Type ................................................. Parallel
Operating Voltage Range................................... +/-15%
Fault Current Rating (AIC).................................. 14 kAIC
Dimensions ..................... .................................... 4.72”x4.72”x2.36”
Operating Frequency Range ............................. 47 – 63 Hz
Capacity................................................................ Continuous
50 EMI/RFI Attenuation ................................... 40 dB
Response Time.................................................... <0.5 ns
Dry Contract rating.............................................. 125vac, 8.0A, 1.0pf
Operating Temperature ...................................... -40ºc to +50ºc
Operating Humidity............................................. 0% to 95%
Status Indication.................................................. LED, Dry Contacts
Certifications........................................................ UL 1449, CUL, CE, ISO 9001
Warranty ............................................................... 5 Years
UL 1449 (second edition) Classification
120 volt systems.................................400 volts all modes
208 through 277 volt systems ..........800 volts all modes
480 volt systems.................................1,500 volts all modes
ORDERING INFORMATION
Building A Model Number: LPL 1 2 3
1: Nominal Voltage Requirements 2: System Configuration 3: Surge Current Capacity
Nominal Voltage Requirements Model ID System Configuration Model ID
L-N L-L L-G
120 ........N/A....... 120 120 Single (2 Wire + Gnd) N or L
120 .......208 ...... 120 120 Split (3 Wire + Gnd) S
120 ........240....... 120 120 Wye (4 Wire + Gnd) Y
N/A ........208....... 208 208 Delta Hi-Leg (4 Wire + Gnd) H
230 ........400....... 230 230 Delta (3 Wire + Gnd) D
N/A ........240....... 240 240
277 ........480....... 277 277
N/A ........400....... 400 400
N/A ........480....... 480 480
Surge Current Capacity Model ID
100 kA/Phase 100
(L-N: 50 kA + L-G: 50 kA; N-G: 50 kA)
50 kA/Phase 50
(L-N: 25 kA + L-G: 25 kA; N-G: 25 kA)
PANEL I.D. MODEL NUMBER(S)
25 kA/Phase 25 – 2
(L-N: 25 kA; N-G: 25 kA)
Job Name _______________________
Model # _________________________
Date ___________________________
Qty ____________________________
Quote # _________________________