LevelOne FCS-1050 - Manual (Page 6)

- 6 -
Software installation
In this manual, "User" refers to whoever has access to the Network Camera, and
"Administrator" refers to the person who can configure the Network Camera and grant
user access to the camera.
At the end of the hardware installation, users can use Installation wizard included in the
product CDROM to find the location of the Network Camera. There may be many
Network Cameras in the local network. Users can differentiate the Network Cameras
with the MAC Address. The MAC Address is printed on the labels on the carton and the
bottom of the Network Camera body.
The IP addresses shown in the
"Current IP Address" field reflect
those on the local network. They
may be from the DHCP server. If
there is no DHCP server, the camera
will try to find a free IP address (this
takes from 15 second to 3 minutes,
depending on the LAN status). The
method of finding IP address is
seeking from 192.168.0.99