Lincoln Electric Pipeliner 200D - Manual (Page 3)

Pipeliner ® 200D
www.lincolnelectric.com [3]
A CLOSER LOOK
QUALITY AND RELIABILITY
• Engine hour meter to track scheduled maintenance.
• Automatic engine shutdown protection for low oil pressure or high
water temperature.
• Electronic engine idler extends engine life and reduces fuel
consumption.
• Attractive and durable pearlescent gray finish paint.
• Manufactured under a quality system certified to ISO 9001
requirements.
• Three-year Lincoln warranty on welder. (Engine is warranted
separately by the manufacturer).
MACHINE SPECIFICATIONS
ENGINE SPECIFICATIONS
Engine Operating Fuel
Model Description Horsepower & Displacement Ignition Capacities Speeds Consumption
Kubota ® 4 Cylinder 27.8 HP @ 1600 RPM Compression FUEL: FULL LOAD 0.9 Gals./Hr
V2403M 4 Cycle Ignited 15 Gals (57 Ltrs) 1,600 RPM (200A/28V) 3.4 Ltr/Hr
(Diesel)(3) Water-Cooled 149 cu in
EPA Tier 4i Diesel Engine (2.4 ltrs) OIL: HIGH IDLE 0.5 Gals/Hr
Cast Iron Cylinders 8.0 Qts (7.6 Ltrs) 1,450-1,600 RPM (adjustable) 1.7 Ltr/Hr
Block / Crank Case
COOLANT: LOW IDLE 0.4 Gals/Hr
9.5 Qts (9.0 Ltrs) 1,400 RPM 1.4 Ltr/Hr
(1) Based on a 10 minute period. High Altitude: For maximum rating, derate the output 4% for every 1,000 ft. (300 m) above 4,900 ft. (1,500 m).
(2) Height is to top of exhaust elbow. Case height is 40.9 in. (1039 mm).
(3) Engine warranty for U.S. and Canada is 2 years/2,000 hours, 3 years major components. Some component limitations exist for Canada. See warranty statement for details.
Product Ordering Rated DC Output (1) DC Current Generator Dimension Weight
Name Information Description Current/Voltage/Duty Cycle Fine Adjustment Range Power H (2) x W x L lbs. (kg)
Pipeliner ® 200D K6090-11 200 Amp Lincoln “Plus” Rating 40 - 300 Amps 1750 Watts 45.5 x 24.0 x 68.0 in 1311
DC Welder 200A /40V/60% DC Auxiliary Power (1156 x 610 x 1727mm) (595)
220 - Max
All Copper NEMA Rating 160 - 240 15 Amps @
Windings 200A / 28V / 60% 120 - 190 120V DC
80 - 130
Pure DC Power Min - 90
Generator
C U S T O M E R A S S I S T A N C E P O L I C Y
The business of The Lincoln Electric Company ® is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of
our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for information or advice about their use of our products. Our employees respond to
inquiries to the best of their ability based on information provided to them by the customers and the knowledge they may have concerning the application. Our employees, however, are not
in a position to verify the information provided or to evaluate the engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not warrant or guarantee or assume
any liability with respect to such information or advice. Moreover, the provision of such information or advice does not create, expand, or alter any warranty on our products. Any express or
implied warranty that might arise from the information or advice, including any implied warranty of merchantability or any warranty of fitness for any customers’ particular purpose is
specifically disclaimed.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the
customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.