Liebherr R1400 - Manual (Page 10)

RBI/RB 1400 EKB/es 4250 6
O
PERATION
Additional functions
In set-up mode you can set the child-proof lock,
adjust the brightness of the display* and choose
the unit of temperature in degrees Fahrenheit or
degrees Celsius for the display.
Activating set-up mode:
W
Press SuperCooling button for approx. 5 secs
- the SuperCooling button fl ashes - the display
shows c for child-proof lock.
Note: the value to be altered fl ashes.
W
Select the required function by pressing the Up/
Down button:
c = child-proof lock,
h = brightness,
0 = unit of temperature
W
Now select/acknowledge function by pressing
Super-Cooling button briefl y:
• For c = child-proof lock,
press the Up/Down button to select
c1 = child-proof lock on or
c0 = child-proof lock off
and acknowledge with the SuperCooling button.
When the symbol 6 is lit, the child-proof lock is
activated.
• For h = brightness,
press the Up/Down button to select
h1= minimum to
h5 = maximum brightness
and acknowledge with the SuperCooling button.
• For 0 = unit of temperature,
press the Up/Down button to select
°C = degrees Celsius or
°F = degrees Fahrenheit
for temperature display and acknowl-
edge with the SuperCool button.
Exit set-up mode:
W
To exit the set-up mode, press the On/Off button.
After 2 mins. without pushing any button the elec-
tronic system switches over automatically.
- The normal operating mode is activated again.
* Depending on model and options
Fan Switch*
for air circulation 5 :
You can use the fan switch as required to:
- chill large quantities of fresh food fast;
- keep the temperature relatively even
distributed throughout the entire refrigerator
compartment. The air will circulate more
intensively, thus keeping all the different
areas in the appliance relatively at the
same temperature and ensuring that all the
food inside is chilled relatively at the same
temperature.
• You are recommended to always use the fan
switch:
- in high room temperatures (approximately
95°F / 35°C or higher) or
- if the air humidity is high, e.g. during the
summer.
• To turn ON: Press the fan button
➃
briefly. The
fan symbol 7 will be shown in the display.
• To turn OFF: Press the fan button again so that
the fan symbol 7 goes dark.
- To save energy, the fan will turn off
automatically when the door is open.