Control timer values (sec) – Linksys SPA 900 Series User Manual

Page 126

Advertising
background image

5-21

Linksys IP Phone Administrator Guide

Firmware Version 5.1

Chapter 5 Linksys IP Phone Field Reference

Regional Tab

Control Timer Values (sec)

Field

Description

Cadence 1

Cadence script for distinctive ring 1.

Defaults to 60(2/4).

Cadence 2

Cadence script for distinctive ring 2.

Defaults to 60(.3/.2, 1/.2,.3/4.

Cadence 3

Cadence script for distinctive ring 3.

Defaults to 60(.8/.4,.8/4).

Cadence 4

Cadence script for distinctive ring 4.

Defaults to 60(.4/.2,.3/.2,.8/4).

Cadence 5

Cadence script for distinctive ring 5.

Defaults to 60(.2/.2,.2/.2,.2/.2,1/4)

Cadence 6

Cadence script for distinctive ring 6.

Defaults to60(.2/.4,.2/.4,.2/4).

Cadence 7

Cadence script for distinctive ring 7.

Defaults to 60(4.5/4).

Cadence 8

Cadence script for distinctive ring 8.

Defaults to 60(0.25/9.75)

Cadence 9

Cadence script for distinctive ring 9.

Defaults to 60(.4/.2,.4/2).

Field

Description

Reorder Delay

(Not applicable to SPA901)

Delay after far end hangs up before reorder tone is played. 0 = plays immediately, inf =
never plays. Range: 0–255 seconds.

Defaults to 255.

Call Back Expires

Expiration time in seconds of a call back activation. Range: 0–65535 seconds.

Defaults to 1800.

Call Back Retry Intvl

Call back retry interval in seconds. Range: 0–255 seconds.

Defaults to 30.

Call Back Delay

(Not applicable to SPA901)

Delay after receiving the first SIP 18x response before declaring the remote end is
ringing. If a busy response is received during this time, the Linksys IP phone still
considers the call as failed and keeps on retrying.

Defaults to 0.5.

Advertising