Lowrance electronic LVR-880 EU - Manual (Page 16)

A dashed line appears. Enter your ATIS MMSI along the dashed line, one number at a
time, using the same method that you used for your user MMSI.
When you have entered the last number, push ENTER. 2.
Enter your ATIS MMSI again as a password check, then push ENTER to permanently store 3.
your ATIS MMSI and return to the menu.
You can view your stored ATIS MMSI at anytime by selecting ATIS MMSI in the main 4.
menu.
Now specify your FM region.
Specify your FM Region
RADIO SETUP
COM PORT
GPS SOURCE
FM REGION
FM REGION
USA
EUROPE
AUS/NZ
FM REGION
AUS/NZ
JAPAN
OTHERS
Press + or – on the microphone OR turn the Channel Select knob to move the cursor to 1.
move the cursor to FM REGION and push ENTER to show the FM REGION options.
Note: All of the options cannot be shown on one screen so you may need to scroll the
cursor down the listing to show your FM region.
The cursor is at USA. 2.
If you want to select a different FM region, move the cursor to that FM region and press 3.
ENT. If you selected USA, EUROPE, AUS/NZ, or JAPAN, the FM REGION selection is now
complete.
If you selected OTHERS, you must also specify the channel spacing, upper frequency,
and lower frequency:
FM REGION
AUS/NZ
JAPAN
OTHERS
OTHERS
CH SPACING
UPPER FREQ
LOWER FREQ
CH SPACING
200KHz
100KHz
50KHz
Press ENT to select CH SPACING then select the channel spacing. 4.
Select UPPER FREQ then select the upper frequency (between 108.00 and 106.00 MHz). 5.
Select LOWER FREQ then select the lower frequency (between 87.50 and 89.50 MHz). 6.
Push ENTER to confirm your selection. Your radio installation and setup is now complete 7.
and you can use the radio.
Lowrance - LVR-880 Installation Instructions 16