Loewe 32959022 - Manual (Page 47)

47 -
Assignment of the digital audio input
In order to be able to hear the digital sound of an external device con-
nected to an AV input, an AV input can be assigned to the digital audio
input socket AUDIO DIGITAL IN. When switching to this AV input, the
digital audio signal applied to the AUDIO DIGITAL IN input is passed on to
the integrated Dolby Digital Decoder and the digital audio output socket
AUDIO DIGITAL OUT. You will then hear the digital sound of the assigned
AV input instead of the analogue sound if available.
Connecting devices to the digital audio input
For the digital audio playback from an external device, e.g. the DVD player,
you have to feed the digital audio signal to the TV set.
The external digital audio signal can be played back via the integrated
retrofittable Dolby Digital Decoder in the TV set, via an externally con-
nected digital audio amplifier or Loewe Auro.
➠ If an external audio amplifier is used, this must be regis-
tered in the sound components wizard (see page 46).
Call TV menu.
34 Select Connections,
6 go to the menu line below.
34 Select Miscellaneous,
6 go to the menu line below.
34 Select Assign digital audio input,
6 go to the menu line below.
34 Select AV input.
To connect a DVD player to the digital audio input of the
TV set for example, connect the digital output socket of
the DVD player (DIGITAL OUT) via a cinch cable to the
AUDIO DIGITAL IN socket on the TV set.
S-VIDEO OUT DIG OUT
REAR
MAINS
L R (CVBS) (Y/C) VIDEO OUT AUDIO
STEREO OUT VIDEO OUT
I
AUX- I/O
II TO TV- I/O
OPT OUT RIGHT SUBW. REAR RIGHT FRONT
LEFT CENTER
MULTICHANNEL AUDIO OUT
DIGITAL AUDIO OUT PCM/MPEG2/AC3/DTS
LEFT FRONT
TV set
DVD player
AUDIO DIGITAL IN
AV1
The DVD player is already registered at AV1 in the connection
wizard at the factory.
If new devices are connected and registered in the
connection wizard, the digital audio input AUDIO DIGITAL
IN is assigned in the connection wizard (see page 8).
Audio connection in HDMI (DVI) devices
External devices with DVI connection
If an external device with DVI interface is connected via a HDMI/DVI
adapter to the HDMI1/DVI or HDMI2/DVI socket of the TV set, you can
connect the digital sound of the external device to the digital audio input
socket AUDIO DIGITAL IN.
The assignment of the digital audio input to the corresponding HDMI
socket of the TV set takes place as described in the column on the left.
If you want to use the analogue sound of the external devices, connect
it to the AUDIO IN1 socket.
External devices with HDMI connection
If external devices with HDMI interface are connected to the HDMI1/DVI
or HDMI2/DVI socket of the TV set, no assignment of the audio input is
necessary because the digital transmission of picture and sound takes
place via one connection in HDMI.
RS-232C interface
You can connect either the Loewe Individual Sound Projector or a home
network system of different manufacturers (e.g. AMX, Crestron) to your
TV set via the RS-C interface.
Please consult your dealer for configuration of the RS-C interface and
further information about the different home networking systems.
Operating additional equipment
to AV2 to AV1
Assign digital audio input
TV menu
Connections
Miscellaneous
to AVS to HDMI1/DVI to HDMI1/DVI no
END INFO