LG 32LC2DU - Manual (Page 14)

14
Introduction
ATTACHING THE TV TO A WALL
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, poten-
tially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.
■ Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
* If your product has the bolts in the eye-bolts position, loosen the bolts.
Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately)
on the wall. Match the height of the bracket that is mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
■ Use a sturdy rope (not provided as parts of the product, must purchase sepa-
rately) to tie the product. It is safer to tie the rope so it becomes horizontal
between the wall and the product.
42PC3D/3DV, 50PC3D 32/37/42LC2D, 32LC2DU
■ Open the battery compartment cover on the
back side and install the batteries matching cor-
rect polarity (+with +,-with -).
■ Install two 1.5V AA batteries. Don’t mix old or
used batteries with new ones.
■ Close cover.
■ Use a remote control up to 7 meters distance and
30 degree (left/right) within the receiving unit
scope.
■ Dispose of used batteries in a recycle bin to pre-
serve environment.
POWER
MENU BRIGH T +
VCR TV DVD
ENTER
EXIT TIMER RATIO INFO
AUDIO CABLE STB MODE
TV INPUT INPUT
BRIGHT -
POWER
MENU BRIGH T +
VCR TV DVD
ENTER
EXIT TIMER RATIO INFO
AUDIO CABLE STB MODE
TV INPUT INPUT
BRIGHT -
POWER
MENU BRIGHT +
VCR TV DVD
ENTER
EXIT TIMER RATIO INFO
AUDIO CABLE STB MODE
TV INPUT INPUT
BRIGHT -
32/37/42LC2D,
32LC2DU
42PC3D/3DV, 50PC3D 60PC1D
Installing Batteries Remote control effective range
60PC1D