LaCie Sound 2 - Manual (Page 5)

Setup Steps
1. Plug the secondary speaker into the main speaker.
2. Connect the power supply kit to a wall outlet and to the speakers.
3. Connect the speakers to your computer with the integrated USB cable.
4. Switch on the LaCie Sound
2 Speakers and adjust volume level by turning the
volume wheel clockwise.
IMPORTANT: For optimum sound, set the pre-amplifier of your audio player
(ex. iTunes, Windows Media Player, or VLC) to 0db. A different configuration
may cause parasite noise or signal distortion.
Note: If you connect and switch on your LaCie Sound 2 Speakers but you don’t hear any
sound when playing an audio file, you may need to select the speakers manually as your
audio output device.
Windows Users: Control Panel>Sounds>Audio>Playback>LaCie Speakers
Mac Users: System Preferences>Sound>Output>LaCie Speakers
To use the LaCie Sound 2 Speakers with an audio device (ex. iPod), connect them to the
device with the audio line-in cable.