La Pavoni LP30 - Manual (Page 6)

At the end of this list is available the visualization of a total counter of the takings of an absolute type
(which can’t be zeroed).
“Total partial takings” visualizes directly the sum of the actual values of all partial counters and thus
represents a total counter of the partial type takings (which can be zeroed).
“Cancel counters” is a command that allows all the partial counters of the takings to be zeroed.
“Counters information” Menu
Cancel counters
Visualize counters
“Visualize counters” is an amalgamation of all partial counters (that can be zeroed) of the recurring
possible anomalies which can occur during the working of the machine.
The visualization of an absolute total counter is also available (which cannot be zeroed) of the
working time of the espresso machine in seconds with a 10 minute (600”) resolution.
“Cancel counters” is a command which allows the zeroing of all partial anomaly counters.
“Product prices” Menu
This menu allows the set-up of prices in real currency of all 72 possible products. It should be noted
that the values can be varied by quantity equal to the base coin, making it important to select in the
correct mode this unit.
There are two special price values indicated by “free” and “not used” included in the list between
maximum price and minimum price. In particular the “free” price allows the selling of that product
even in the absence of credit, whilst the “not used” price disables the sale of that specific product.
“Config. product” Menu
Spiral Rotation
Lift quote
Disk machine
With this menu it is possible to configurate the parameters and the options relating to the dispensing
of the product.
“Spiral rotation” contains the 72 values relative to the extra rotation of the spirals. The patented
“System” permits the rotation of the spiral superior to 360°, programmable for each spiral. After this
extra rotation, the spiral inverts direction and returns exactly to 360°. An automatic control system
allows to bring the spiral under phase in the event of, for example, a power cut during the rotation.
“Lift quote” allows the modification of the position of the (optional) lift in correspondence to the trays
in the machine.
“Disk machine” contains the parameters relative to the use of the logic board for disk machines, not
spiral ones. In this menu only the option to activate the double impulse is available.
“Config. Coin mechanism” Menu
General config.
Parallel coin mechanism
Executive coin mechanism
“General config.” Gathers all parameters relative to the payment systems that are commune to all
types of coin mechanism. In this submenu is the free sale option for all products, the value of the
base coin, the number of decimals and the currency symbol to be used in the visualization of all
costs.