Lightolier Calculite HID Wall Wash C6T6W - Manual

Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Group LLC • B1204
7-7/8" (181 mm) Dia.
Fixture Support Membe
5/8" (16 mm) to
2 7/8" (73 mm)
8 6 9 10 7 2 4 5 3 1
2" (50 mm) max.
Ceiling Thickness
9-3/8"
(238 mm)
5-3/4" (146 mm) Dia.
Top View
(Electronic Ballast)
20" (508 mm) to
30" (762 mm)
9-3/4" (248 mm)
10-7/8" (276 mm)
18-5/8" (473 mm)
Top View
(Magnetic Ballast)
11" (280 mm)
(150W)
20" (508 mm) to
30" (762 mm)
10-7/8" (276 mm)
9-3/4" (248 mm)
10-1/2" (267 mm)
Calculite ® HID Wall Wash
C6T6W
Page 1 of 2 6" Aperture, T6 Ceramic Metal Halide
Ceiling Cutout: 6 9/16" (167mm) Dia.
Reflector Trim Frame-In Kit Lamp
C6T6W CLW Specular Clear, White Painted Flange.
CLP Specular Clear, Matching Flange.
CCDW Comfort Clear Diffuse, White Painted Flange.
CCDP Comfort Clear Diffuse, Matching Flange.
CCZW Champagne Bronze, White Painted Flange.
CCZP Champagne Bronze, Matching Flange.
C639T6E1 Electronic 120V 39W T6 Ceramic MH
C639T6E2 Electronic 277V 39W T6 Ceramic MH
C670T6E1 Electronic 120V 70W T6 Ceramic MH
C670T6E2 Electronic 277V 70W T6 Ceramic MH
C615T6E1 Electronic 120V 150W T6 Ceramic MH
C615T6E2 Electronic 277V 150W T6 Ceramic MH
C615T6U Magnetic 120V/277V 150W T6 Ceramic MH
Features
1. Upper Reflector: Clear anodized aluminum, 0.040" (16-ga.). Provides
wide beam optics ideal for general lighting and wall washing.
2. Downlight/Wall Washer Reflector: Provides vertical surface wall
washing and downlighting. Low brightness with 50° visual cut off to
lamp and lamp image.
3. Lamp Shield: High-temperature glass as required by code, captive during
re-lamping. Light diffusion provides exceptionally smooth beam.
4. Socket Housing: Galvanized steel, pre-wired with G12 pulse rated socket.
Snaps onto upper reflector for secure attachment without tools; assures
proper lamp alignment to optics for consistent performance.
5. Mounting Frame: 0.048" (18-ga.) galvanized steel. Vertical adjustment
mechanism accommodates mounting to virtually any ceiling system using
mounting bars (provided, or 1/2" EMT tubing (by others). Single locking fea-
ture secures all adjustments. Alignment holes and markings allow fixture to
be preset prior to installation.
6. Mounting Ring: 0.048"(18-ga.) galvanized steel. Designed for vertical
adjustment from above or below for ceilings from 0" to 2" thick. Center-line
notches allow consistent alignment of multiple fixtures.
7. Mounting Bars: 0.048" (18-ga.) pre-installed, telescoping bars extend to 30"
long and lock securely into position. Built-in locking tabs provide positive attach-
ment to common T-bar systems. Self-centering feature simplifies installation in
24" O.C. grid systems. Attaches to steel or wood joists without accessories.
8. Trim Retention Springs: Rust resistant springs secure reflector/housing for
quick, tool-less installation.
9. Ballast / Socket Housing / Cover Assembly: Electronic, snaps onto junc-
tion box without tools for inspection and ballast replacement, accessible
from below.
10. Junction Box: 0.048" (18-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90°C through branch circuit conductors. Allows inspection from below.
11. Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not
install insulation above nor within 3" (76mm) of any part of the luminaire.
Electrical
Electronic Ballast: 120 or 277V, 50/60 Hz., encased, high power factor, T.H.D.
<15%, thermally and transient protected, RMI/RFI complies with FCC Part 18
non-consumer equipment, shut-down circuit at end of lamp life, sound rating
“A”, -5°F (-20°F for 150W) minimum starting temperature, Type 1 outdoor rating.
Electrical (Cont.)
*150W Magnetic Ballast: 120V/277V dual voltage, 60 Hz., encased and pot-
ted, HX-HPF circuit type, high power factor, sound rating “B”, -20°F minimum
starting temperature, Type 1 Outdoor rating.
Ballast ANSI Code Voltage Max. Amps Input Watts
39W MH M130 120/277 0.39/0.17 44
70W MH M139 120/277 0.67/0.29 78
150W MH M142 120/277 1.40/0.60 169/166
* 150W MH M142 120/277 3.70/1.60 180
Options and Accessories
Chicago Plenum: Consult Factory.
Labels
cULus (Suitable for Damp Locations), I.B.E.W.
For 150W, install fixtures with minimum spacing; 3 feet from center-to center
of adjacent luminaries, 3” from top of luminaire to overhead building member;
1 1/2 feet from luminaire center to side building member.