LSI MiniHAB 44929LO - Manual (Page 33)

Physical Characteristics 2-17
Ver. 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved.
2.6.10 LSI44929O Connector and Indicator LED
The LSI44929O I/O bracket is configured as shown in Figure 2.10 . Two
LC connectors are used to connect the adapter channel to the Fibre
Channel subsystem. The indicator LEDs are used to indicate link status,
activity, and link fault for each channel.
Figure 2.10 LSI44929O Connectors and Indicator LEDs
Table 2.7 Link Activity/Link Fault LED - LSI44929O
Link Activity Fault
Appearance of LED
Off Green Blinking Yellow
Channel 0 LED
Channel 0
Channel 1 LED
Channel 1