Linear COMP-DA-1X8 - Manual (Page 8)

CONNECTING AND OPERATING THE 1x8 COMPONENT / AUDIO DA
Application Diagram
4
Connect the supplied component cable from the HDTV source into the 1X8
Component / Audio DA’s input port.
Connect either a SPDIF digital audio or RCA analog right and left audio cable
into the 1X8 Component / Audio DA’s audio input port.
Connect the component and audio cables from your display(s) (up to 8) into
the component and audio out slots on the 1X8 Component / Audio DA.
Plug the 5V DC power supply into the 1X8 Component / Audio DA.
Plug the 5V DC wall mount power supply into the wall outlet.
1
2
3
5
6
How to Connect the 1x8 Component / Audio DA to your devices
NOTE:
Both analog and digital audio outputs are active on all of the outputs.
Also, Composite video can also be fed into the Component video input to split and
distribute Composite video.
Maximum recommended distance of component cabling between each COMP-DA-
1X8 or display (1080p) is 50 ft. Maximum number of displays that are supported in a
large 1x8 Component / Audio DA system is 512.
Multiple COMP-DA-1X8 devices can be daisy chained together to distribute a single
Component signal to 73 units maximum, for a total of 512 displays.
COMP-DA-1X8
COMP-DA-1X8
COMP-DA-1X8
X8
X64
Maximum 512 Displays