Lucent Technologies MDW 9031 - Manual (Page 12)

Quick Reference
MDW 9031/9031DCP Wireless Pocket Phone Quick Reference
503-801-165 8 Issue 2 February 1999
Changing Settings or Performing Tests in Local Mode
1 Make sure the handset is turned off.
2 Press and hold
"
for 3 seconds.
3 While still holding
"
, press
O.
4 Press one of the following:
A (
2
) to enable or disable the alerter.
L (
5
) to enable or disable backlighting.
P ( 7 ) for 3 seconds, then " to enable or disable
Line Preselection.
V (
8
) to enable or disable the vibrator.
W (
9 ) to enter Wireless Test Mode, then 1 for signal strength 2
for voice quality 3 for matching radio module and slot number 5
for handset power settings
#
to enter Local Test Mode.
5 Press
O to exit.
! CAUTION:
The MDW 9031/9031DCP handset is a radio device and, like all radio
devices, should not be placed next to a pacemaker. See “Guidelines
for Safe and Efficient Operation” in the MDW 9031/9031DCP Wireless
Pocket Phone Installation and Use guide for more information.