La Crosse Technology WS-7107U - Manual (Page 17)

17
3. To reset the Minimum/Maximum
readings, press and hold the
“MIN/MAX” button for five seconds.
MOUNTING
Note: To achieve a true temperature
reading, avoid mounting in direct sunlight.
We recommend that you mount the remote
temp/humidity sensor on an outside North-
facing wall. The sending range is 330ft;
obstacles such as walls, concrete, and large
metal objects will reduce the range. Place
both units in their desired location
temporarily to test reception capability
before permanently mounting.
A. REMOTE TEMP/HUMIDITY
SENSOR
1. Remove the mounting bracket from
the remote temp/humidity sensor
2. Mount using either screws or
adhesive tape.