Lennox Hearth BLPKB-40TB User Manual

Packaging list, Brickaded panel liner kit (mlbv/slbv), Installation instructions

Advertising
background image

1

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

INSTALLATION INSTRUCTIONS FOR BRICkAded pANeL LINeR kITS

FOR USe wITh MLBV ANd SLBV SeRIeS FIRepLACeS

pACkAGING LIST

Package 1 of 1 contains:

(1) - Left Side Panel

(1) - Right Side Panel

(1) - Rear Panel

Brickaded PaNeL LiNer kit

(MLBV/SLBV)

506019-68

Rev. NC 12/2010

INSTALLATION INSTRUCTIONS

Step 1. Follow the procedure “Turning Off Gas To Unit,” located on the

Lighting Instructions pullout label in the control compartment

of the unit and also in the appliance Installation Instructions.

Step 2. Remove the front glass enclosure panel (see appliance Instal-

lation Instructions).

Step 3. If applicable, carefully remove the log set from the firebox, and

place them in a safe location.

Note: Ceramic fiber logs are FRAGILE!

Handle carefully to prevent breakage.

Step 4. Refer to Figure 3. Carefully bend the Tab to the RIGHT; then

place the rear panel against the rear wall of the firebox. Return

the Tab to its original vertical position after installation.

Step 5. Refer to Figures 3 and 4. Carefully slide the left side panel

into the firebox between the firebox wall and the lintel.

Step 6. Repeat Step 5 for the right side panel.
Step 7. Carefully replace the log set and glass enclosure panel. Refer

to the appliance Care and Operation Instructions for details on

log placement enclosure panel installation.

HEARTH PRODUCTS

KITS AND ACCESSORIES

Ceramic Brickaded panel Liner kits

Fireplace

Model No.

panel Liner kit

Model No.

description

MLBV-35

MBLpkB-35B

Buff Rustic, 35"

MLBV-40

MBLpkB-40B

Buff Rustic, 40"

SLBV-35

BLpkB-35TB

Buff Traditional, 35"

SLBV-40

BLpkB-40TB

Buff Traditional, 40"

MOdeLS

Brickaded panel liner kits and related fireplaces are listed below.

Figure 2 (MLBV shown)

Left Side

Firebox wall

Right Side

Firebox wall

Lintel

~

~

~

~

Tab

Left Side panel

Right Side panel

Rear panel

Figure 1

Lintel

Tab

(Before inserting Rear Panel, carefully bend Tab to RIGHT;

then, return to vertical position after installation.)

~

~

Figure 3

Figure 4

Left Side

panel

Right Side

panel

Rear

panel

Advertising
This manual is related to the following products: