Lexmark 10N0227 - Manual

Refill Instructions -
Lexmark 10N0227 (No.27)
Lexmark
X72, X74, X75, X1110, X1130, X1150, X1160, X1170, X1180,
X1185, X2230, X2240, X2250
Z13, Z23, Z25, Z33, Z34, Z35, Z75, Z513, Z515, Z597, Z601,
Z604, Z605, Z607, Z612, Z615, Z617, Z713
Instructions
1.
appropriate colour ink. (fig.2)
2. Remove the top from the black ink bottle and using the
syringe remove 5ml of the colour ink (fig.3)
3. The lid has to be removed from the cartridge. Cut around
the edge with a sharp knife and then remove (fig.4)
4. Insert the steel filling tube into the appropriate filling holes.
(fig.5). Push down into centre of the sponge.
IMPORTANT: Cartridge contains a sponge and a slight
resistant may be felt.
5.
Inject ink. Stop filling before ink overflows as you
do not want the ink to contaminate the other colours.
6. Repeat steps 4 and 5 with the other 2 colours
7. Blot printer heads with tissue before continuing to fill next
colour.
IMPORTANT: Clean syringe with water and dry before refilling
next colour.
8. After refilling replace the lid and stick it down with sellotape
9. Leave the cartridge to stand overnight on non-absorbent
surface this will ensure no leakage and give the ink time to fully
saturate the sponge.
IMPORTANT: DO NOT LEAVE ON TISSUE.
10. Install cartridge and run a priming cycle.
PLEASE NOTE: The ink indicator level may need to be turned
off. Check your HP instructions manual for details.
For more info go to
Assemble syringe and steel filling tube and fill with
SLOWLY
help.jrinkjet.co.uk
Items Required
Original Lexmark 27 Cartridge, Syringe & Filling Tube Cyan,
Magenta & Yellow Ink 5ml, sharp knife, news paper, sellotape
fig.2 fig.3
fig.5
fig.1
t
s e
B
& la
ni
gir
O
4
9
9 1
ec
ni
S
Magenta
Refill
Holes
Yellow
Refill
Holes
Cyan
Refill
Holes
Print Head
End
Print Head
Remove Lid
fig.4
Cut
Here