LG AX390 - Manual (Page 18)

16
GETTING STARTED WITH YOUR PHONE
GETTING S
TAR
TED WITH Y
OUR PHONE
The Battery
The phone comes with a rechargeable battery. Keep
the battery charged while not in use in order to
maximize talk and standby time. The battery charge
level is shown at the top of the LCD screen.
Installing the Battery
To install the battery, insert the battery into the
opening on the back of the phone. Put the battery
cover on the battery and push it slightly upwards.
Removing the Battery
Turn the power off. Push down slightly. Pull the
battery cover downward and remove it. Then remove
the battery by pressing the upper area of it.
Charging the Battery
To use the charger provided with your phone:
Warning! Use only the charger provided with the
phone. Using any charger other than the one included
with the AX390 may damage your phone or battery..
1. Plug the end of the adapter into the phone’s charger
port and the other end into an electrical outlet.
2. The charge time varies depending upon the
battery level.
Battery Charge Level
The battery charge level is shown at the top right of
the LCD screen. When the battery charge level
becomes low, the low battery sensor alerts you in
three ways: sounding an audible tone, blinking the
battery icon, and displaying
Low Battery . If the
battery charge level becomes exceedingly low, the
phone automatically switches off and any function in
progress is not saved.
Empty Fully Charged
Note
It is important to fully charge the battery before initial use
of the phone.
AX390_Eng.qxd 5/17/06 8:39 PM Page 16