Lopi 21 TRV - Manual (Page 3)

20 1/2”
44 1/4”
47 3/4”
2
Two Styles
Of Fireplaces For Any Need
17
Landscape-Style DVS and DVL
Fireplace Framing Specifications
1 D V S - D i r e c t V e n t S m a l l
Lopi Portrait-Style gas fireplaces are a cozy and
convenient way to provide warmth and the beauty
of fire to rooms not normally considered for fireplaces.
They’re designed for corner or limited space
installations in small intimate settings such as
bedrooms, baths, dining rooms or kitchens. These
fireplaces have the flexibility to be installed at eye
level or directly on the floor. Compact and easy to
install, the applications are limited only by your
imagination!
Choose from two face styles, the cast iron Looking
Glass in black painted or porcelain enamel or the
Wilmington, in black painted or pewter plated finish.
Both designs, with the many custom options, offer
unlimited possibilities for your homes decor.
Model 21DV
Rated to heat up to 650 sq. ft.
and delivers a Btu input
on high of 16,500 Btu’s/hour.
Lopi landscape-style gas fireplaces are our traditional looking fireplaces and are furnace rated and ideal for both
zonal heating specific area of your home or as your primary heat source.
Lopi makes two models of landscape fireplaces: the DVS (Direct Vent Small) and DVL (Direct Vent Large).
Both DVS and DVL models are available in a selection of designer faces with different finishes.
As an added value, both DVS and DVL fireplaces offer standard, 130 CFM fans to aid in the circulation of heated
air within your home.
Model DVS is rated to heat
up to 1,500 sq. ft.
and delivers a Btu input
on high of 31,000 Btu’s/hour.
Model DVL is rated to heat
up to 2,000 sq. ft.
and delivers a Btu input
on high of 40,000 Btu’s/hour.
2 D V L - D i r e c t V e n t L a r g e
Bedford Face Design
(DVS only)
Wilmington Face Design Discovery Face Design
19 5/8”
37 1/4”
35”
36”
When using an
elbow off the top of
the unit the fireplace,
allow for a 2”
clearance above the
vent and 1” to the
sides and bottom.
When venting to the
rear, allow a min.
8 5/8” gap centered
behind the fireplace
for the vent and wall
thimble.
When using an
elbow off the top of
the unit the fireplace,
allow for a 3”
clearance above the
vent and 1” to the
sides and bottom.
When venting to the
rear, allow a min.
10” gap centered
behind the fireplace
for the vent and wall
thimble.
Please refer to the Owner’s Manual for all installation information. Owner’s Manuals can be
downloaded from the Lopi website under the specific product -- www.lopistoves.com.
46 3/4”
The fireplace
enclosure must not
be less than 54 3/4”
above the base of
the fireplace
Hearth Requirements:
A non-combustible hearth is required. Non-combustible hearth must be a minimum of 32 3/4” to 37 5/8” wide (depending on face)
x 12” deep and a minimum of 3/4” thick. When fireplace is raised a minimum of 3”off of the floor surface, no hearth is required.
Hearth Requirements:
A non-combustible hearth is required. Non-combustible hearth must be a minimum of 29 7/8” to 33 1/8” wide (depending
on face) x 12” deep and a minimum of 1 1/4” thick.
46 3/4”
65 3/
4” 37
”
14 3/8”
13 5/8”
19 3/8”
13”
Corner Installations
47 5/8”
44 1
/4”
13 3/4”
19 3/8”
14 3/4”
Corner Installations
Minimum 1”
clearance to
fireplace enclosure
1” Stand offs
Fireplace includes
1/2” stand offs
L o p i h a s j o i n e d w i t h s e v e r a l c u s t o m c a b i n e t
manufacturers to offer one-stop solutions to easily finish
your fireplace without the cost of custom finish work.
Ask your Lopi dealer or visit one of the websites below
for details.
J. C. Huffman Cabinetry
www.jchuffman.com
Grand Mantel
www.grandmantel.com
1 P o r t r a i t - S t y l e F i r e p l a c e s
2 L a n d s c a p e - S t y l e F i r e p l a c e s
Pewter Wilmington face design in
floor mounted cabinet
Taupe porcelain Looking Glass
face design in tall corner cabinet.