LG 47VL10 - Manual (Page 7)

7
ENG
ENGLISH
ASSEMBLING AND PREPARING
y Connect the speaker terminals noting the
correct polarity.
Connecting the stand
- Only on some models.
1 Take the parts for the stand out of the box and
assemble them as shown in the picture.
Connecting the Speakers
- Only on some models.
1 Mount the product onto the speaker by using
a screw as shown in the following connect the
speaker cable.
2 Place a soft cloth on the table and put the
product with the screen facing downward.
Connect the stand as shown in the following
picture.
2 After installing your speakers, use holders and
cable ties to organize the speaker cables. (This
feature is not available in all model.)
3 Use the screws to secure the stand on the rear
side of the product as shown in the diagram.
Stand Screws
cable management
NOTE