Linksys Director / Wireless-N Music Player DMC250 - Manual (Page 44)

Using Your Director
37 Director/Wireless-N Music Player with Integrated Amplifier
Wireless Home Audio
Play To
The Play To option allows you to link zones so that your
music or radio stations are played to multiple rooms
perfectly in sync.
Network
The network option allows you to modify your Director’s
wired or wireless network settings. This should not be used
for initial configuration of your Director or Conductor. It is
necessary to use the LELA CD-ROM to setup your Director
or Conductor to setup your Internet services.
Connect to Network
Select the connection method that will be used to connect
the Wireless Home Audio Director to the network.
Wired
Advanced This option is used for IP configuration. A
dynamic or static IP address can be selected here.
Dynamic IP • The dynamic IP option should be selected
if your router or network connection automatically
provides an IP address to devices on the network.
Once this option is selected, the Details screen can be
used to verify that an IP address has been obtained.
Static IP • Selecting Static IP will prompt you to enter
the IP address. To enter the IP address using the
remote control, remove the existing address by using
the left arrow on the Navigation Halo. Numbers can be
entered manually using the keypad or arrow up and
down on the Navigation Halo to scroll through the
number selections. To move to the next digit, use the
right arrow on the Navigation Halo. To enter a dot (.)
or period in the IP address, press the zero (0) button
twice.
Details This option displays the current network
connection settings including the wireless network name,
wireless security type, DHCP status, IP address, subnet
mask, gateway, and DNS information.
Wireless
Select Network Use this option to select a wireless
network name (also known as an SSID) from the list of
available networks or enter a wireless network name
manually by selecting Enter Network Name. To enter
the name manually, use the alphanumeric keypad on the
remote control to select the appropriate characters or use
the up and down arrows on the Navigation Halo to scroll
through the list of characters. To enter the next character,
use the right arrow on the Navigation Halo.