Linksys WVC54GC - Manual (Page 15)

7 Chapter 3: Getting to Know the Compact Wireless-G Internet Video Camera
Camera Ports
Compact Wireless-G Internet Video Camera
Camera Ports
The Camera features two ports on its back panel.
POWER The POWER port is where you will connect the power adapter.
ETHERNET The ETHERNET port is where you will connect the Ethernet network cable.
Camera Stand
The Camera can stand on a surface or be mounted on a wall. Depending on the positioning you want, you can
attach the Camera head to its stand at two different points.
If you want to stand the Camera on a surface, insert the screw end of the stand into the hole on the bottom panel.
Tighten the screw end and then the gray thumbscrew.
If you want to mount the Camera on a wall, insert the screw end of the stand into the hole on the back panel.
Tighten the screw end, and then tighten the gray thumbscrew. Refer to “Chapter 5: Setting Up and Mounting the
Compact Wireless-G Internet Video Camera” for further instructions about mounting the Camera on a wall.
Figure 3-4: Camera in Standing Position
Figure 3-5: Camera in Wall-Mounting Position
Thumbscrew
Hole for Attaching
Stand (Wall-Mount
Option)