Land Pride ZT72 - Manual

1 © Copyright 2009 Printed
Mower Jack (ZT Series Mower Shown)
Figure 1
Before You Start
Your Mower Jack is exclusively designed for the Land
Pride ZXT & ZT Series Zero Turn Mowers. Please read
these installation instructions and your Operator’s
Manual thoroughly before beginning. Especially read
information relating to safety concerns.
A separate Parts Manual for your Zero Turn Mower can
be purchased from your dealer or available free of
charge at www.landpride.com. Have model and serial
numbers handy when placing an order.
Manual Part Numbers:
ZXT54 & ZXT60
• Operator’s Manual . . . . . . . . . . . . . . . . 357-271M
• Parts Manual . . . . . . . . . . . . . . . . . . . . . 357-271P
ZT60 & ZT72
• Operator’s Manual . . . . . . . . . . . . . . . . 357-103M
• Parts Manual . . . . . . . . . . . . . . . . . . . . . 357-103P
25819
When you see this symbol, the subsequent
instructions and warnings are serious - follow
without exception. Your life and the lives of
others depend on it!
!
IMPORTANT: Before you begin, read these
instructions and check to be sure all parts and tools
are accounted for. Please retain these installation
instructions for future reference and parts ordering
information.
General Information
The Land Pride Mower Jack is designed for raising the
front of the mower axle frame and deck to better access
front axle components and deck underside. It is
especially useful for cleaning the deck underside,
accessing cutting blades and making front tire repairs.
Further Assistance
Your dealer wants you to be satisfied with your new
Mower Jack. If for any reason you do not understand any
part of this manual or are not satisfied with the service
received, the following actions are suggested:
1. Discuss the matter with your dealership service
manager making sure he is aware of any problems
you may have and that he has had the opportunity to
assist you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
[email protected]
Assembly Instructions
These assembly instructions apply to the accessory kit
listed below:
357-209A Mower Jack, ZXT & ZT Series
A detailed listing of parts for this accessory kit is provided
on page 2. Use the list as a checklist to inventory parts
received. Please contact your local Land Pride dealer for
any missing hardware.
Tools required
•
Safety glasses
•
One 9/16" box end or open end wrench
•
Torque wrench with 9/16" socket.
Initial Preparations
1. Park unit on a flat surface and make sure blade
engagement switch is in the down (OFF) position.
2. Spread both control levers fully apart. Stop engine
and remove ignition key.
For ZXT54, ZXT60, ZT60 & ZT72 Zero Turn Mowers
ZXT & ZT Mower Jack
Assembly Instructions
03/25/09
Manual No. 357-259M