Linksys Wireless-G Print Server WPSM54G - Manual (Page 12)

Chapter 3
Advanced Configuration
10 Wireless-G PrintServer
The Printer Tab > Internet Printing
Internet Printing allows you to automatically print any
e-mails that are sent to a specific e-mail account on your
network. This is especially useful for printing information
when you are not connected to the network. You can print
from any location where you can access e-mail.
Printer > Internet Printing
Mail Server
Mail Server IP Address Enter the IP address of your mail
server. (This value must be a fixed IP address.)
Account Name and Password Enter the Account Name
and Account Password.
Verify Password Enter the Account Password again.
Check Mail every Specify how often you want the
PrintServer to check for e-mail to be printed.
Redirect unprintable Mail to Specify an e-mail address
to which e-mails that cannot be printed are routed;
this is useful for both graphic-intensive e-mails and for
troubleshooting purposes.
Printer
Printer Model Enter the Printer Model. You can find this
through the Device Manager in your Windows operating
system.
Printer Port Choose the appropriate Printer Port from
the drop-down menu: USB 1, the PrintServer’s USB port,
or Logical Printer 1-3. The PrintServer has three logical
or virtual printer ports. For example, you can have three
different configurations for your printer: Logical Printer
1 for landscape orientation, Logical Printer 2 for double-
sided copies, and Logical Printer 3 for manual feed. Then
configure the Logical Printers on the Logical Port tab, so
Logical Printers 1, 2, and 3 will be mapped to the physical
printer on the PrintServer’s USB port.
Options
Print every E-Mail Select this option if you want to print
every e-mail message.
Print Banner Page Enabled by default, this feature tells
the PrintServer to print a banner page for every print job
(the banner page describes the print job). Deselect this
option to disable this feature.
Mail response when printed Select this option if you
want an e-mail sent when a print job is complete.
Click the Save button to apply your changes, or click the
Cancel button to cancel your changes.
The Printer Tab > Logical Port
Configure the settings of each Logical Printer.
The PrintServer has three logical or virtual printer ports.
For example, you can have three different configurations
for your printer: Logical Printer 1 for landscape orientation,
Logical Printer 2 for double-sided copies, and Logical
Printer 3 for manual feed. Map Logical Printers 1, 2, and 3
to the physical printer on the PrintServer’s USB port.
Printer > Logical Port
Select Printer
Logical Printer No. Select the number (1-3) of the printer
you wish to configure. Click the Get Data button to update
the display with the current data for the selected logical
printer.
Details
Pre-string (Hex) Enter the printer control string (in
hexadecimal characters) to be sent to the printer before
each print job. This string cannot exceed 30 characters.
Post String (Hex) Enter the printer control string (in
hexadecimal characters) to be sent to the printer after
each print job. This string cannot exceed 30 characters.
Convert LF to CR+LF Select this option if you want LF
(line feed) characters changed to CR+LF (carriage return
+ line feed) characters.
Click the Save button to apply your changes, or click the
Cancel button to cancel your changes.