Lincoln Electric LN- 25 IM10084 - Manual (Page 15)

CV Power Sources with Stud Connectors and no
Remote/Local Switch. (See Figure A.7)
Place CV/CC switch in the feeder in the "CV" position.
Work clip
Work
Electrode
Jumper
Ranger 250, 250 LPG
Ranger 305G, 305D
Ranger 10,000
Ranger 3 Phase
Ranger 225GXT
Ranger 225
Commander 300
Vantage 300, 400, 500
Air Vantage 500
LN-25™ IRONWORKER
FIGURE A.7
A-6 INSTALLATION
LN-25™ IRONWORKER
A-6
CV Power Sources with Stud Connectors and
Remote/Local Switch (See Figure A.6)
Place the power source Remote/Local switch in the
Local position.
Place CV/CC switch in the feeder in the "CV" position.
Work clip
Work
Electrode
(Across the Arc)
CV-400
CV-655
DC-400
DC-600
DC-655
V450-Pro
SAE 400 with CV adapter
Engine Driven welder with
Wire Feed Module
Ranger 250 GXT
LN-25™ IRONWORKER
FIGURE A.6
POWER SOURCE TO LN-25™ IRONWORKER
CAbLE CONNECTION DIAGRAMS
K#
K2614-9
KP1695-XX
KP1696-XX
KP1697-XX
See magnum Literature
K1803-1
Description
LN-25™ IRONWORKER
Drive Roll Kit
Welding Gun
CV power Source
Welding Cables
K#
K2614-9
K484*
KP1695-XX
KP1696-XX
KP1697-XX
See Magnum Literature
K1803-1
Description
LN-25™ IRONWORKER
Jumper Plug Kit
Drive Roll Kit
Welding Gun
CV power Source
Welding Cables
* If Power Source has a 14-Pin Cable connector and no
“Output Terminal” switch.