Land Pride FM4188 - Manual

19
Flail Mower Specifications
The 41 Series offers 3/16” deck material and utilizes a
threaded rod to easily offset the hitch by nearly 8”. The
gearbox incorporates an over-running clutch that enables
the rotor to swing free to a stop when the tractor PTO has
been turned off. The rear gate of the mower
can be opened for easier discharge in heavy
conditions, or left closed for greater mulching
capabilities. The 41 Series also offers heavy
forged hammers and brush rake teeth.
• 2” Cutting capacity
• 1/2” – 6” Cutting height
• Rear height adjusting roller with greaseable bearings
and tapered ends to prevent gouging during turns
• Scrapers on rear height adjusting roller
• Fine cut knives
• 5-1/2” Rotor diameter
• Reverse rotor rotation
• Cat. 4 driveline
• 3/16” Deck thickness
• Hitch offsets by nearly 8”
• Hinged rear gate allows opening for maximum dispersal
of heavy clippings
• Replaceable skid shoes
• Fenders on both ends to protect trees
• Three ‘C’ section belts for a tight positive drive
• Gearbox with built-in over-running clutch allows rotor
to free-wheel to a stop
The 41 Series features 24 forged
hammers to shred prunings and to
provide a nice clean cut in grass.
13 adjustable brush rake teeth also
keep prunings in the blade path for
maximum mulching.
FM41
SERIES
35 - 80 HP — 88”
The baffles on the top
inside of the deck keep
the cut material from
clumping together.
(41 Series blades)
Model Number FM2060 FM2072 FM3188 FM4188
Hitch Cat. 1 Cat. 1 Cat. 1
Offset Hitch 6-1/4" Right, 7-3/4" Left & Right, 7-3/4" Left & Right,
Centered Screw Type Screw Type
HP Rating – Max. 55 HP 80 HP 80 HP
Gearbox RPM 540 w/over-running clutch 540 w/ over-running clutch 540 w/ over-running clutch
Cutting Width (cm) 60" (152.4) 72" (182.88) 88" (223.52) 88" (223.52)
Cutting Height (cm) 0-4" (0-10.16) 1/2" – 6" (1.27-15.24) 1/2" – 6" (1.27-15.24)
Cutting Capacity (cm) 1" (2.54) 1" (2.54) 2" (5.08)
Weight (kg) 662 lbs. 728 lbs. 1,300 lbs. 1,323 lbs.
(300) (330) (590) (600)
Knives Fine Cut Fine Cut Hammers
No. of Knives (cm) 60 72 48 24
Rotor Diameter (cm) 4-1/4" (10.8) 5-1/2" (13.97) 5-1/2" (13.97)
Rotor Rotation Reverse Reverse Reverse
Driveline Cat. 4 Cat. 4 Cat. 4
Belt Type 2 ‘B’ Section 3 ‘C’ Section 3 ‘C’ Section
Deck Thickness 11 Gauge 3/16" 3/16"
Brush Rake Teeth N/A N/A 13 each