Printing a banner – Lexmark Z54 User Manual
Page 63
Advertising
63
Printing a banner
Note: Some software applications and some operating systems do not support
banner printing.
Step 1: Load the banner paper
Make sure your banner paper is not used or damaged.
1
Remove any paper from the paper support.
2
Tear off enough pages for the banner
including one extra sheet, and then place
them behind the printer.
3
Load the unattached leading edge of the first
page into the printer, with the right side
against the paper support.
Note: Forcing the paper too far into the
printer may cause a paper jam.
For help, see
.
4
Squeeze and slide the paper guide to the left edge of the banner paper.
Advertising