Lincoln Electric Cool-Arc 40 - Manual (Page 2)

GENERAL OPTIONS
Horizontal Mounting Bracket
For mounting cooler horizontally
on top of the power source. For
use with CV-305, CV-400, CV-
655, DC-400, DC-600, DC-655.
Order K559-2
Vertical Mounting Bracket
For mounting cooler vertically in
the cylinder rack. For use with
CV-305 with K874 undercarriage,
and Power Wave 455 with
K1570-1 undercarriage.
Order K559-3
Magnum® Flow Sensor
Protects valuable torches, guns
and robotic welding systems from
damage when loss of coolant flow
has occurred for any reason, such
as a blocked or kinked water line
or ruptured hose.
Order K1536-1
Quick Connect Water Adapter
Converts a male 5/8"-18 left
hand hose fitting (CGA style) to a
female quick connect fitting. The
female quick connect mates with
the male quick connect on water-
cooled MIG guns or hoses.
Order KP1529-1
Water Cooler Hoses
(CGA to QD)
For use with wire feeders having
female disconnect fittings. Kit
contains two 25 ft. hoses with
5/8" left hand CGA fittings on
cooler side and male quick dis-
connect fittings on the feeder end.
Order K1859-1
Water Cooler Hoses
(CGA to CGA)
For 5/8" LH CGA fitting applica-
tions at both cooler and wire
feeder. Kit contains two 25 ft.
hoses with 5/8" left hand CGA
fittings on both ends of hose.
Order K1859-2
Magnum 450WC Water-Cooled
MIG and Gas-Shielded Flux-
Cored Gun & Cable Assembly
Extend the life of your gas dif-
fusers, nozzles and contact tips.
Rated up to 450 amps, 100%
duty cycle when used with 100%
C0
2
. Requires K489-x Adapter
Kit depending on wire feeder
brand and model.
Order K684-x.
Request Publication E12.70
Python Water-Cooled Push-Pull
MIG Gun & Cable Assembly
Interchangeable barrels and cups
allow you to optimize the capabili-
ties, cost and weight of your
Python push-pull torch for each
application. Rated up to 400
amps, 100% duty cycle with
optional water-cooled barrel
(KP2224-1) and Cup (KP2225-1).
Order K2212-x.
Request Publication E12.13
Pro-Torch™ Water-Cooled
TIG Torches
Lightweight with ergonomically
designed handles and superflex
cables. Rugged and reliable for
high performance welding
applications.
Request Publication E12.150
A CLOSER LOOK
• For Use Above Freezing:
Clean tap, distilled or deionized water.
• For Use Below Freezing:
50% pure ethylene glycol mixture, 50% water.
• Important Application Note:
- The Cool-Arc 40 is designed for continuous operation
and should never be installed in conjunction with a water
solenoid. Therefore, if using the Cool-Arc 40 in a previous
Magnum 10 or 20 application, the water solenoid on the
power source should not be used.
- Do not use oil based coolants.
- Do not use automotive antifreeze with rust or
leak inhibitors.
T H E L I N C O L N E L E C T R I C C O M PA N Y
22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com
COOLANT REQUIREMENTS
RECOMMENDED OPTIONS
C U S T O M E R A S S I S T A N C E P O L I C Y
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their
expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers based on the best information in our possession at that time. Lincoln Electric
is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s
particular purpose, with respect to such information or advice. As a matter ofpractical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has been given, nor
does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the
control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change — This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.