Laser STB-HDM2000 - Manual (Page 6)

STB-HDM2000 User Manual
6 7
fIrST TIMe InSTallaTIon
Start channel installation.
For first time use, the automatic installation message will appear on screen.
a. Select the menu display language.
b. Select the reception country.
c. Then, select your time zone .
d. Please keep the LCN (Logical Channel Number) option ON (activated), so that
the channels can be classified in the correct order.
e. Press the Start button to begin the channel search. The DVB-T channel search
starts immediately and will only take a few minutes
SySTeM SeTup
Press [Menu] key to access:
OSD Language
Use this item to select the language of the setup menu and screen display.
Country
Australia is the correct default setting.
LCN (Logical Channel Number)
Used to classify DVB-T channels in the predefined order. In most of the countries,
including Australia, this option must be enabled.
Time Zone
In this menu adjust the time zone to NSW/ACT+10:00, VIC+10:00, QLD+10:00,
SA+9:30,WA+8:00, TAS+10:00,NT+9:30
Parental Control
Select Parental Control to set a block based on program ratings. Highlight Parental
Control and press OK. A PIN CODE Dialogue box will be displayed, enter your PIN
(default code is “0000”) and press OK. Once in the Parental Control sub-menu use