LST EDS500-1 - Manual

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED EDS-UMB500-1_DBL_LST_EN_0804.PDF • PAGE 1
A
Building Safety. Building Security.
Position Switch EDS500-1
The Position Switch EDS500-1 (fi g. A) is an addressable
module and serves for the confi rmation of the position
of mechanical devices, such as slides or valves, via the
bidirectional communication on the ADM loop with Sys-
tem Sensor/200 protocol. The module is fi tted into a
plastic case. Due to the use of optoelectronic compon-
ents the module is especially durable and fail-safe. The
mounting terminals are designed according to DIN 912
M5. The module address is entered using a push button
and can be verifi ed by means of an LED.
• ADM loop technology with
System Sensor/200 protocol
• Confi rmation of the valve position or
integration of contact detectors into
the ADM loop
• Status LED
• Setting of address by means of
push button
• Small design
Specifi cations
Operating voltage Supply through loop voltage
Current consumption approx. 300µA (quiescent)
Ambient temperature -20°C to +60°C
Dimensions L × W × H 59 Ч 32 Ч 63 (mm)
Colour red/black
Protection class IP65
Weight 80g
Order number 249090
Order name Position Switch/Anal./500/SS EDS500-1
fi g. A
fi g. B