Lucent Technologies 6220 - Manual (Page 7)

To program for normal Hold (that is, the
feature which allows the user to put a call on hold)
1. Press the Program button; then press ;
then press .
2. Press again; then press again;
finally, press the Program button again.
Locking and Unlocking the Programmable
Dialing Buttons
The system manager can lock the 10 programmable dialing
buttons so the numbers or features assigned to these buttons
CANNOT be changed.
To lock the Programmable Dialing buttons so that
their assignment cannot be changed
1. Press the Program button; then press .
2. Press “752 (RLC)” on the dial pad.
3. Press again; then press the Program button
again.
To unlock the Programmable Dialing buttons
1. Press the Program button; then press .
2. Press “766 (RNO)” on the dial pad.
3. Press again; then press the Program button
again.
— FCC Information —
FCC REGISTRATION AND REPAIR
INFORMATION
Your new Lucent Technologies telephone has been registered
with the Federal Communications Commission (FCC). This
product complies with standards in Part 68 of the FCC rules.
The FCC requires us to provide you with the following
information:
CONNECTION AND USE WITH THE
NATIONWIDE TELEPHONE NETWORK
The FCC requires that you connect your telephone equipment
to the nationwide telephone network through a modular
telephone outlet or jack. The modular telephone outlet or jack
to which the telephone must be connected is a USOC RJ11C
or RJ11W. The telephone may not be used on coin service
provided by the telephone company. Connection to party lines
is subject to state tariffs. (Contact your state public utility
commission or corporation commission for information.)
INFORMATION FOR THE TELEPHONE
COMPANY
Upon request of your local telephone company, you are
required to provide them with the following information:
A.) Your phone number. B.) The telephone equipment’s FCC
registration number and ringer equivalence number (REN).
These numbers are on the back or bottom of your telephone
equipment. The REN is useful to determine how many
devices you may connect to your telephone line and still have
them ring when your telephone line is called. At most, but not
all areas, the sum of all REN’s should be 5 or less. You may
want to contact your local telephone company.
Hold
Flash
Hold
Hold Flash
Flash
Flash
Flash
Flash
REPAIR INSTRUCTIONS
If it is determined that your telephone is malfunctioning, the
FCC requires that it not be used and that it be unplugged from
the modular outlet until the problem is corrected. Repairs can
only be made by the manufacturer or its authorized agents or
by others who may be authorized by the FCC.
RIGHT OF THE TELEPHONE COMPANY
If telephone equipment is causing harm to the telephone
network, the telephone company may temporarily discontinue
your telephone service. If possible, they’ll notify you before
they interrupt service. If advance notice isn’t practical, you’ll
be notified as soon as possible. You’ll be given the
opportunity to correct the problem, and you’ll be informed of
your right to file a complaint with the FCC. Your telephone
company may make changes in its facilities, equipment,
operations or procedures that could affect the proper
functioning of your Lucent Technologies product. If such
changes are planned, you will be notified.
INTERFERENCE INFORMATION
!
WARNING:
Some telephone equipment generates and uses radio
frequency energy and if not installed and used properly,
that is, in strict accordance with the manufacturer’s
instructions, may cause interference to radio and
television reception. These telephones have been type
tested and found to comply with the limits for a Class B
computing device in accordance with the specifications
in Subpart J of Part 15 of FCC Rules, which are
designed to provide reasonable protection against such
interference in a residential installation.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
interference to radio or television reception, which can be
determined by turning the equipment on and off, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient the receiving television or radio antennae
where this may be done safely.
• To the extent possible, relocate the receiver with
respect to the telephone equipment.
• Where the telephone equipment requires ac power,
plug the telephone into a different ac outlet so that the
telephone equipment and receiver are on different
branch circuits.
— Warranty Information –
LUCENT TECHNOLOGIES WARRANTY
INFORMATION
WHAT IS COVERED: All terms and conditions specified
in your agreement with Lucent Technologies apply.
TO GET WARRANTY SERVICE FOR YOUR
TELEPHONE: Call the Lucent Technologies Customer
Service Support Operations toll-free at 1 800 242-2121 or
call the distributor from whom the product was purchased. If
you are directed to ship your telephone to an authorized
service location, you must prepay all shipping costs. We
suggest that you retain the original packing material in the
event you need to ship the unit. When sending your
telephone to a service location, include your name, address,
phone number, proof of purchase (or original shipping
receipt), and description of the operating problem. After
replacing your telephone, Lucent Technologies will ship it to
you at no cost to you
5