Lucent Technologies 6220 - Manual (Page 2)

IMPORTANT INFORMATION
SAFETY INSTRUCTIONS
The most careful attention has been devoted to quality standards
in the manufacture of your new telephone. Safety is a major
factor in the design of every set, but, safety is YOUR
responsibility too.
Please read carefully the helpful tips listed below and on the next
page. These suggestions will enable you to take full advantage of
your new telephone. Then, retain these tips for later use.
Use
When using your telephone equipment, the following safety
precautions should always be followed to reduce the risk of fire,
electric shock, and injury to persons.
•
Read and understand all instructions.
•
Follow all warnings and instructions marked on the telephone.
• This telephone can be hazardous if immersed in water. To
avoid the possibility of electric shock, do not use it while you
are wet. If you accidentally drop the telephone into water, do
not retrieve it until you have first unplugged the line cord
from the modular jack. Then, call service personnel to ask
about a replacement.
•
Avoid using the telephone during electrical storms in your
immediate area. There is a risk of electric shock from
lightning. Urgent calls should be brief. Even though
protective measures may have been installed to limit electrical
surges from entering your business, absolute protection from
lightning is impossible.
•
If you suspect a natural gas leak, report it immediately, but use
a telephone away from the area in question. The telephone’s
electrical contacts could generate a tiny spark. While unlikely,
it is possible that this spark could ignite heavy concentrations
of gas.
•
Never push objects of any kind into the equipment through
housing slots since they may touch hazardous voltage points
or short out parts that could result in a risk of electric shock.
Never spill liquid of any kind on the telephone. If liquid is
spilled, however, refer servicing to proper service personnel.
•
To reduce the risk of electric shock, do not disassemble this
telephone. There are no user serviceable parts. Opening or
removing covers may expose you to hazardous voltages.
Incorrect reassembly can cause electric shock when the
telephone is subsequently used.
Service
•
Before cleaning, unplug the telephone from the modular wall
jack. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
•
Unplug the telephone from the modular wall jack. Be sure to
refer servicing to qualified service personnel when these
conditions exist:
— If liquid has been spilled into the telephone.
— If the telephone has been exposed to rain or water.
— If the telephone has been dropped or the housing has
been damaged.
— If you note a distinct change in the performance of the
telephone.
SAVE THESE INSTRUCTIONS
OTHER INFORMATION
NOTICE
While reasonable efforts were made to ensure that the
information in this document was complete and accurate at the
time of printing, Lucent Technologies can assume no
responsibility for any errors. Changes or corrections to the
information contained in this document may be incorporated
into future issues.
TO ORDER COPIES OF THIS DOCUMENT
For more information about related documents, see Business
Communications Systems Publications Catalog, 555-000-010.
TRADEMARKS
DEFINITY and MERLIN LEGEND are registered trademarks
of Lucent Technologies.
HEARING AID COMPATIBILITY
These telephones are Hearing Aid Compatible (HAC) and thus
have “HAC” printed on them.
ACKNOWLEDGMENT
This document was prepared by the BCS Product Publications
Department, Lucent Technologies, Middletown, NJ 07748-9972.
When you see this warning symbol on the
product, refer to these instructions packed with
the product for more information before
proceeding further in the installation process.
Contact: Lucent Technologies BCS Publications Center
2855 N. Franklin Road
Indianapolis, IN 46219
Voice 1 800 457-1235
International Voice 317 322-6791
Fax 1 800 457-1764
International Fax 317 322-6699
Order: Document No. 555-230-713
Issue 2, August 1999
!