Leupold VX-II - Manual (Page 14)

14
How to Sight-In
USINg A BoRE-SIgHTINg CoLLIMAToR
To save time and ammunition, start out in your shop or gun room
with a bore-sighting collimator . Follow the directions included with
the collimator for specific instructions on its proper use . Remember,
when possible, it is better to make the initial windage adjustments
to the mount base before using the scope’s windage adjustment .
NoTE: Bore-sighting alone is not sufficient to sight-in a scope. You
must make final adjustments by shooting the firearm using the same
ammunition you use in the field.
USINg THE LEUPoLD zERo PoINT
ILLUMINATED MAgNETIC BoRESIgHTER
This tool fits any rifle, shotgun, or pistol, and helps you get “on the
paper” fast, without barrel spuds . It works with any optical sight,
and can even be used to recheck your zero, without firing a shot .
See your Leupold golden Ring Dealer or visit www .leupold .com for
more information .
How
to
Sight-In